Conductivity Electrodes
Conductivity Electrodes
Hach Company Sension+ 5062 portable titanium conductivity cell for “difficult” applications
Sension+ 5062 is a two-pole titanium conductivity cell with a titanium body and built-in temperature sensor. The 5062 has a fixed 1 meter cable and MP5 connector dedicated for use with Hach Sension+ Portable Conductivity meters. The 5062 is ideal for conductivity measurements in extreme conditions and for “difficult” applications, including dirty and viscous samples.
Hach Company Probe Cable Depth Markers for Rugged IntelliCAL Probes
Taking readings at specific depths with rugged outdoor electrodes is a snap with these depth markers. Visually identify the depth of your electrode by attaching depth marker securely on cable at points to meet your needs. Five markers per package.Note: For use with rugged outdoor electrodes only.
Hach Company Contacting Conductivity Sensor, Mid-Range Conductivity, K=1.0, 3/4" Kynar Compression Fitting
Nominal Cell Constant (K) = 1.0, 3/4 inch NPT Kynar (PVDF) Compression Fitting, 6m (20ft) Analog Cable, Titanium Electrode
Hach Company Radiometer Analytical CDC511T Conductivity Cell with Temperature Sensor (4-pole Pt sensor, k = 1.0 cm-1)
The Radiometer CDC511T is a 4-pole conductivity cell with non-platinized, platinum sensor (k = 1.0 cm-1), integrated temperature sensor and TPX body. The CDC511T sensor's 4 platinum ring design ensures results in general aqueous and non-aqueous media over several decades of conductivity with a single cell, using just one calibration. The CDC511T can be used with a flow-through cell for pure water measurements and meets requirements of USP 24-NF19. It has a fixed cable with MAB6 plug for use with Radiometer Analytical CDM210/230/92 conductivity meters.
Hach Company Sension+ 5060 portable platinum conductivity cell for general purpose applications
Sension+ 5060 is a three-pole platinum conductivity cell with a polycarbonate body and built-in temperature sensor. The 5060 has a fixed 1 meter cable and MP5 connector dedicated for use with Hach Sension+ Portable Conductivity meters. The 5060 is ideal for conductivity measurements in general aqueous applications.
Hach Company Sension+ 5049 portable multi-parameter electrode: pH, conductivity, DO, and temperature
Sension+ 5049 is a multi-parameter electrode for determination of pH, conductivity, DO and temperature. The 5049 has a plastic body, and 3 parameter-specific, separately attached electrodes. The probe has a fixed 1 meter cable and MP8 connector dedicated for use with Hach Sension+ MM156 portable meters. It is ideal for pH, conductivity, and DO measurements in general aqueous applications.
Hach Company Radiometer Analytical CDC241 Conductivity Cell (2-pole Pt sensor, k = 1.0 cm-1, glass body, screw cap)
The Radiometer CDC241 is a 2-pole conductivity cell with non-platinized, platinum sensor (k = 1.0 cm-1) and glass body. The CDC241 sensor's 2 platinum plate design is ideal for continuous measurement or titration in viscous media. The CDC241 has a screw cap connection and requires the CL136 cable (part no. A94L136) for compatibility with Radiometer Analytical CDM210/230/92 conductivity meters or the CL143 cable (part no. A94L143) for compatibilty with Hach sensION+ benchtop conductivity meters.
Hach Company Radiometer Analytical CDC641T-6 Conductivity Cell with Temperature Sensor (2-pole Pt sensor, k = 0.85 cm⁻¹, glass body)
The Radiometer CDC641T-6 is a 2-pole conductivity cell with platinized, platinum sensor (k = 0.85 cm-1), glass body and integrated temperature sensor. The CDC641T-6 sensor's 2 platinum plate design is ideal for routine conductivity measurements or for continuous measurement in various aqueous and non-aqueous media. Additionally, the CDC641T-6 meets requirements of EP 2.2.38. The cell has a fixed cable with RJ45 plug for use with Hach sensION+ benchtop conductivity meters.
Hach Company Radiometer Analytical CDC566T Conductivity Cell with Temperature Sensor (4-pole Pt sensor, k = 1.0 cm-1, epoxy body)
The Radiometer CDC566T Conductivity Cell is a 4-pole conductivity cell with non-platinized, platinum sensor (k = 1.0 cm-1), robust epoxy body and integrated temperature sensor. The CDC566T sensor's 4-pole platinum ring design ensures results in general aqueous and non-aqueous media over several decades of conductivity with a single cell, using just one calibration. The epoxy body of the probe can be easily removed for rinsing, which makes the cell ideal for measurements in harsh conditions. The CDC566T has a fixed cable with MAB6 plug for use with Radiometer Analytical CDM210/230/92 conductivity meters. Please reference article no. E61M021 for the CDC536T (3-pole), compatible for use with Hach sensION+ benchtop conductivity meters.
Hach Company Sension+ 5070 laboratory platinum conductivity cell for general applications
Sension+ 5070 is a three-pole platinum conductivity cell with a glass body and built-in temperature sensor. The 5070 has a fixed 1 meter cable and telephonic connector dedicated for use with Hach Sension+ Laboratory Conductivity meters. The 5070 is ideal for conductivity measurements in general aqueous applications.
Hach Company Radiometer Analytical XE100 Conductivity Cell (2-pole Pt sensor, k = 1.0 cm-1, glass body, screw cap)
The Radiometer XE100 is a 2-pole conductivity cell with platinized, platinum sensor (k = 1.0 cm-1) and glass body. The XE100 sensor's 2 platinum plate design is ideal for routine conductivity measurements or for continuous measurement in various aqueous and non-aqueous media. The XE100 has a screw cap connection and requires the CL136 cable (part no. A94L136) for compatibility with Radiometer Analytical CDM210/230/92 conductivity meters or the CL143 cable (part no. A94L143) for compatibilty with Hach sensION+ benchtop conductivity meters.
Hach Company Radiometer Analytical CDC641T Conductivity Cell with Temperature Sensor (2-pole Pt sensor, k = 0.85 cm-1, glass body)
The Radiometer CDC641T is a 2-pole conductivity cell with platinized, platinum sensor (k = 0.85 cm-1), glass body and integrated temperature sensor. The CDC641T sensor's 2 platinum plate design is ideal for routine conductivity measurements or for continuous measurement in various aqueous and non-aqueous media. Additionally, the CDC641T meets requirements of EP 2.2.38. The cell has a fixed cable with MAB6 plug for use with Radiometer Analytical CDM210/230/92 conductivity meters. Please reference article no. E61M022 for a version of the CDC641T with RJ45 plug, compatible for use with Hach sensION+ benchtop conductivity meters.
Hach Company Radiometer Analytical CDC866T Conductivity Cell with Temperature Sensor (4-pole Pt sensor, k = 1.0 cm-1, epoxy body)
The Radiometer CDC866T Conductivity Cell is a 4-pole conductivity cell with platinized, platinum sensor (k = 1.0 cm-1), robust epoxy body and integrated temperature sensor. The CDC866T sensor's platinized, 4-pole platinum ring design ensures results in saline (high conductivity) or general aqueous and non-aqueous media over several decades of conductivity with a single cell, using just one calibration. The epoxy body of the probe can be easily removed for rinsing, which makes the cell ideal for measurements in harsh conditions. The CDC866T has a fixed cable with MAB6 plug for use with Radiometer Analytical CDM210/230/92 conductivity meters. Please reference article no. E61M020 for the CDC836T (3-pole), compatible for use with Hach sensION+ benchtop conductivity meters.
Hach Company Intellical™ CDC401 Field 4-Poles Graphite Conductivity Cell, 15 m Cable
Intellical™ CDC401 is a digital, graphite, 4-pole conductivity cell with a temperature sensor. This Rugged CDC401 version is built with a stainless steel body ensuring sufficient weight to the probe for an easy outside handling, the sensing part is protected by a shroud, and the connection is ensured by strong and visible yellow coloured cable onto which you can clip depth markers (optional accessories), making the CDC401 rugged models specially designed for field use. CDC401 Rugged is available with a 5, 10, 15, or 30 meters cable. The CDC401 Rugged is ideal for measuring electrical conductivity, salinity, resistivity, or total dissolved solids (TDS) in all types of external environment such as river, surface and ground waters, ponds, lakes, sea, wastewater plant, source water, drinking water reservoir for water quality, environmental and treatment process purposes.
- 1
- 2