Embedding Accessories
Embedding Accessories
Electron Microscopy Sciences Thompson Monolayer Embedding Mold
This mold used for embedding mammalian cells in monolayer culture in preparation of sectioning for light or electron microscopy. Tissue culture monolayer embedding molds eliminate the need for traditional BEEM capsules. The improved molds can be used to transfer the majority of cells from the entire surface of a cover slip to avoid losses of large amounts of cellular information occurring only randomly. In addition, other problems such as surface blemishes caused by air entrapment associated with BEEM capsules are eliminated.
Electron Microscopy Sciences Thompson Monolayer Embedding Mold
This mold used for embedding mammalian cells in monolayer culture in preparation of sectioning for light or electron microscopy. Tissue culture monolayer embedding molds eliminate the need for traditional BEEM capsules. The improved molds can be used to transfer the majority of cells from the entire surface of a cover slip to avoid losses of large amounts of cellular information occurring only randomly. In addition, other problems such as surface blemishes caused by air entrapment associated with BEEM capsules are eliminated.
Electron Microscopy Sciences Micro-Bed Embedding Resin 500 ML
Micro-Bed resin is a water-soluble resin, a mixture of acrylate and polyester resins. Universal embedding medium that may be used for light or electron microscopy.
Due to its non-crosslinking characteristics, its hydrophilic nature, and roughness of its section surface, it is excellent in preserving tissue structure, offers good results in immunolabeling, and stands up well to conventional stains.
In LM, tissues were stained with conventional histological stains (e.g.,hematoxylin-eosin) and embedded in Micro-Bed: results comparable with those provided on paraffin embedded tissues. Polychrome silver-based and cytochemical stains (e.g.,PAS) were also feasible. In TEM, images as good as those obtained with similar acrylic resins, (e.g., Lowicryl K4M), were obtained.
Supplied as a single component-ready to use pre-mixed resin. Micro-Bed can be polymerized by heat (55-65°C) or UV (365nm) at -10 to 20°C for 72 hours.
Electron Microscopy Sciences Molding Cup Tray, 5 mm height
These polyethylene trays are ideal for casting specimen blocks embedded with JB-4 or equivalents and are used with our block holders and chucks shown above.
Size: 6 x 12 mm
Height: 5 mm
Electron Microscopy Sciences Molding Cup Tray, 5 mm height
These polyethylene trays are ideal for casting specimen blocks embedded with JB-4 or equivalents and are used with our block holders and chucks shown above.
Size: 6 x 8 mm
Height: 5 mm
Electron Microscopy Sciences Disposable Base Mold, 30 x 24 mm, 5 mm height
Our Disposable Base Mold is designed to fit all existing cassettes. Because our base molds are disposable you save time on cleaning and storing and they offer you less exposure to hazardous chemicals.
Size: 30 x 24 mm
Height: 5 mm
Electron Microscopy Sciences Easy-Molds™ for size 00 Capsules, 8 mm diameter
A newly designed mold which is convenient and offers better embedments. This tray-and-mold in one unit offers a unique specimen block that no other mold can. Each tray contains 2x10 block molds and measures 87x66 mm. Size 8mm diameter corresponds to capsule size "00" and forms a block face of 3mm.
Electron Microscopy Sciences Easy-Molds™ for size 00 Capsules, 8 mm diameter
A newly designed mold which is convenient and offers better embedments. This tray-and-mold in one unit offers a unique specimen block that no other mold can. Each tray contains 2x10 block molds and measures 87x66 mm. Size 8mm diameter corresponds to capsule size "00" and forms a block face of 3mm.
Electron Microscopy Sciences Easy-Molds™ for size 3 Capsules, 5.6 mm diameter
A newly designed mold which is convenient and offers better embedments. This tray-and-mold in one unit offers a unique specimen block that no other mold can. Each tray contains 2x10 block molds and measures 87x66 mm. Size: 5.6mm diameter corresponds to capsules size 3, and forms a block face of 1.6mm.
Electron Microscopy Sciences Biopsy Bags, Size: 74 x 94 mm., 100/PK
These bags are made from porous paper which provides maximum tissue safety during processing. They permit proper fluid exchange and drainage. To Use simply introduce the specimen into the bag and fold it enclosing the cassette or capsule. You are now ready to process as usual. Size: 74 x 94 mm.
Electron Microscopy Sciences TI Embedding Rings
The most difficult step of cross-sectional thinning is the mechanical preparation of the sample, i.e. cutting a cross section and then embedding it into an appropriately designed ring. We now offer a convenient, specially designed embedding ring for cross-sectional samples.
Using this ring, embedding cross sections is greatly simplified, since the samples do not need to be glued together prior to embedding. In order to fix the sample(s) in the ring, it is deformed mechanically by an appropriate tool at the two points marked by the arrows. This deformation will both hold the sample in the ring and press both sample pieces together before gluing. Ti disc is also offered for embedding bulk samples of brittle material for plan-view TEM investigations. The rings come in 5 sizes-0.6, 0.8 1.0, 1.2, 1.3 mm.
Electron Microscopy Sciences Paraffin TMA ArrayMold E, Blue, 1.5 mm diameter, 72 cores per mold Capacity
The Arraymold is the simple tool for laboratories to perform Paraffin tissue microarrays (TMAs) w/ less time while maintaining excellent results. Process up to 150 specimens onto one single slide w/ very little time consuming, minimal technical training. The DVD instruction is accompanying w/ each kit, will step by step guide you to perform through the entire TMAs process. Arraymolds allow pathologist or researcher to view many different samples on the same single slide. Helpful in finding IHC markers for control or quality assurance from hundreds of samples. Staining markers will be more consistent when hundreds of samples are on one slide. Used less costly antibody.Arraymold kit is small enough to be stored in a drawer.Rubber arraymold can be reused many times without losing its flexibility. Generates 1.5 mm diameter sample core, 72 cores per mold. Kit: 10 Disposable 2mm sterile dermal needles, 2 Stylets, 1 Brass Plate, 1 1.5mm reusable rubber Arraymold, DVD.Color: Blue
Electron Microscopy Sciences Capsule Mold Type C, 12 Cavities
Our molds are made from the strongest possible silicone rubber providing extremely high tear resistance. The molds are are reusable. Type C has 12 cavities cylindrical shapes, 8mm diameter 16mm height, flat tip.
Electron Microscopy Sciences Aluminum Base Mold, 50 x 50 x 30 mm
This extra large square base mold offers optimal thermal conductivity. Features a well polished surface for easy block removal. It will accommodate most samples.
Electron Microscopy Sciences T-Sue™ Microarray Mold Kit, 2 mm
T-Sue array molds are specifically designed to be simple, easy to use and inexpensive. The tissues can be analyzed in consistent conditions enhancing the efficiency of the research. Allow you to perform TMAs more quickly with excellent results. By using array molds, you can process up to 170 specimens onto one single slide in very little time.
Made of silicone, these molds can withstand temperatures between -100 deg C to +250 deg C and be reused hundreds of times without losing their flexibility.
Each kit includes one T-Sue array mold and four punch needles with stylet.
Size: 2 mm
Capacity: 24 cores