Electron Microscope Specimen Mounts and Holders
Electron Microscope Specimen Mounts and Holders
Electron Microscopy Sciences Standard Pin SEM Stub 3-Division 1/2" Head with 9 mm Pin, Aluminum, 3.2 mm Pin diameter
3-Division surface pin stub mounts are for use with FEI/Philips, ZEISS/LEO, Cambridge, Leica, Amray, Tescan and Camscan are made from lathe finished ultra-pure aluminum.
Head: 1/2"
Pin height: 9 mm
Pin diameter: 3.2 mm
Electron Microscopy Sciences SEM Hitachi S-450 M4 Mount 3-Division 5/8", 1/4" height, Aluminum
Hitachi S-450 SEM mounts with M4 tapered hole and female thread. With 3 divisions. Made from ultra-pure aluminum with standard lathe finish.
Head: 5/8"
Height: 1/4"
Electron Microscopy Sciences SEM Mount Hitachi M4 1" Surface 9-Division, 1/4" height
Hitachi cylinder mount has a M4 tapered hole with female thread. Made from lathe finished ultra-pure aluminum. M4 tapered hole.
Head: 1"
Height: 6 mm
Electron Microscopy Sciences Hitachi M4 SEM Cylinder Mount 1-1/4" surface, 3/8" height, Aluminum
Hitachi M4 Thread SEM mounts made from lathe finished ultra-pure aluminum.
Head: 1-1/4"
Height: 3/8"
Electron Microscopy Sciences Standard Pin SEM Stub Slotted 18 mm Head with 8 mm Pin, Aluminum, 3.2 mm Pin diameter
Pin stub mount with slotted head for use with Cambridge, Leica, ZEISS/LEO, FEI/Philips, PHENOM, CamScan, and Tescan.
Head: 18 mm
Pin height: 8 mm
Electron Microscopy Sciences SEM Hitachi S-450 M4 Mount 3-Division 5/8", 1/4" height, Aluminum
Hitachi S-450 SEM mounts with M4 tapered hole and female thread. With 3 divisions. Made from ultra-pure aluminum with standard lathe finish.
Head: 5/8"
Height: 1/4"
Electron Microscopy Sciences Hitachi M4 SEM Cylinder Mount 1-1/4" surface with 12 Divisions, 1/4" height, Aluminum
Hitachi M4 Thread SEM mounts made from lathe finished ultra-pure aluminum.
Head: 1-1/4"
Height: 1/4"
Electron Microscopy Sciences JEOL SEM Cylinder Mount 1" surface, 13/16" height, Aluminum
Cylinder specimen mounts are for use with JEOL scanning electron microscopes. The mounts are made from ultra-pure aluminum with a standard lathe finish.
Head: 1"
Height: 13/16"
Electron Microscopy Sciences SEM Cylinder Mount 45° Angle 1" Surface, Aluminum
Scanning electron microscope specimen mount with 45 degree angle. Made from lathe finished ultra-pure aluminum.
Head: 1"
Height: 13/16"
Electron Microscopy Sciences SEM Cylinder Mount 45° Angle 1" Surface, Aluminum
Scanning electron microscope specimen mount with 45 degree angle. Made from lathe finished ultra-pure aluminum.
Head: 1"
Height: 13/16"
Electron Microscopy Sciences Multi Holder for 8 Pin Stubs, 3.2 mm x 8mm Pin
This 50 mm in diameter multi pin holder is designed to save time.It is made from machined aluminum with stainless steel Allen wrench screws. It accommodates up to eight standard 12.7 mm (1/2") pin stubs.
Type: 3.2 mm
Electron Microscopy Sciences Multi Holder 45 ° for 6 pin stubs, 3.2 mm x 8mm Pin
This 35 mm in diameter 45 Degree multi pin holder is designed to save time. It allows for a higher SE signal without having to tilt the specimen. It is made from machined aluminum with stainless steel Allen set screws. It accommodates up to six standard 12.7 mm (1/2") pin stubs.
Type: 3.2 mm x 8 mm Pin
Electron Microscopy Sciences 45 degree Pin Stub Holder, 3.2 mm x 8mm Pin
This 45 degree pin stub holder allows for a higher SE signal without having to tilt the specimen stage and it accommodates any standard 12.7 mm (1/2") pin stubs with 3.2 mm (1/8") pin.. Grooved, machined aluminum with stainless steel Allen set screw.
Type: 3.2 mm x 8 mm Pin
Electron Microscopy Sciences SEM Cylinder Mount 45° Angle 1" Surface, Aluminum
Scanning electron microscope specimen mount with 45 degree angle. Made from lathe finished ultra-pure aluminum.
Head: 1"
Height: 13/16"
Electron Microscopy Sciences Large Set Screw Vise, Ø25 mmx10 mm (H), Hitachi M4
This set screw vice which is made from machined aluminum with stainless steel allen set screws has an open slot that is 10 mm (.394") wide x 5 mm (.197") deep. It measures 25 mm (1”) dia. x 17.5 mm (0.69”) high.
Type: Hitachi M4