Lab Desiccants and Drying Agents
Lab Desiccants and Drying Agents
Hygroscopic substances and drying agents for use in laboratory settings; drying agents are commonly used to keep other substances and samples dry, or to prevent moisture from forming on/in containers. Products include drying tubes, kits, etc.
Desiccants are typically chemicals or compounds that are hydroscopic (readily absorb moisture). Common desiccants include clays, silica gels, and calcium sulfate.
In the lab, desiccants are commonly used in desiccators and desiccator cabinets, with in-line air and gas drying columns, in absorption bulbs, U-tubes, glove boxes, sealed chambers, and wherever a dry environment is required. They are also used during transport, for storage, and maintaining materials and products ─ everything from clothing to electronics.
The moisture may come from a variety of sources:
- Water vapor in the air
- Moisture in packaging materials
- Moisture from permeation or leakage
Some desiccants contain an indicator or additive that produces a color change with moisture absorption. The indicator allows the user to see when the desiccant has absorbed its maximum amount of moisture and needs to be replaced or regenerated.
Some desiccants can be reused many times simply by heating them in an oven to allow moisture to evaporate. For indicating desiccants, one can also easily tell when the desiccant is again ready to use by the change back to the original color.
Desiccants may be available in a range of mesh or particle sizes. The Tyler Equivalent is a common type of mesh sizing and indicates the number of openings per linear inch of mesh. Common desiccant mesh sizes are 4, 8, and 10 to 12. Size 4 is typically used in gas phase applications; they are larger and less likely to break. Size 8 is smaller and can be more tightly packed.
Electron Microscopy Sciences Desiccant Cartridge, Small
These desiccant cartridges can be used in desiccator cabinets or non-vacuum desiccators, analytical balance cases, and precision laboratory instruments. The clear polystyrene dish allows for instant visual inspection of the silica gel color which changes from blue to pale pink as it absorbs moisture.
A highly porous membrane covers the dish of the desiccant providing good moisture absorption. The desiccant can be regenerated by heating cartridges in an oven at 50 degree C (122 degree F) overnight or in a 150 degree C (302 degree F) oven for one hour. The silica gel is inert and non-toxic. Each cartridge is individually sealed in aluminum foil. Dispose of the cartridges after repeated use.
Electron Microscopy Sciences DriBox Reusable Desiccant Canister
The DriBox is a 2" x 2" x 1" dehydrating cartridge that will remove moisture and prevent corrosion in a 3 cu. ft. sealed container. The dark blue Desiccant will turn pink over time, indicating that it is ready to be regenerated. This is a popular item to use in a safe or other sealed container where moisture is a concern. This can be regenerated in a microwave for a few seconds at a time until the beads become dark blue again. An oven can also be used at 225 degrees for 3-4 hours or until the beads are once again dark blue.
Electron Microscopy Sciences Silica Gel Canister, 500 per pack
This small container offers more desiccant in less space. It is ship-proof and possesses greater drying capabilities. Designed for use in bottles and small containers. Perfect for protecting against potency loss, odor formation, color changes, caking, mildew and condensation. Capsule shell is made from polyethylene with very fine mesh top and bottom. The canister contains 1 gram silica gel.
Electron Microscopy Sciences Silica Gel Packets 5 Gram, 1-1/16" x 2-¼", 45.75 cubic inch Capacity
Silica Gel-Desiccant is a fast and extra moisture absorbing agent. Meets FDA specifications for food and drug product. Provides superior absorption. Remains dry at maximum saturation. Silica gel can absorb 15% of its weight in water vapor in two hours.
Dimensions: 1-1/16" x 2-¼"
Capacity: 45.75 cubic inch
Electron Microscopy Sciences Desiccant Canister - Reusable
Ideal for dry control of desiccator cabinets. Moisture is absorbed through the perforations in the aluminum case, which contains silica gel. This 2 x 4" canister maintains a safe level of humidity in 3cu.ft (0.8 cu. meter) area. When the monitor window turns pink, the silica gel is saturated. It can be regenerated in a 300 degree F (150 degree C) oven in about 3 hours. The monitor window will be blue in color when recharged.
Electron Microscopy Sciences Silica Gel Packets 1 Gram, 7/8" x 1½", 6.1 cubic inch Capacity
Silica Gel-Desiccant is a fast and extra moisture absorbing agent. Meets FDA specifications for food and drug product. Provides superior absorption. Remains dry at maximum saturation. Silica gel can absorb 15% of its weight in water vapor in two hours.
Dimensions: 7/8" x 1½"
Capacity: 6.1 cubic inch
Electron Microscopy Sciences Desiccant Canister
Ideal for dry control of desiccator cabinets. Moisture is absorbed through the perforations in the aluminum case, which contains silica gel. This 2 x 4" canister maintains a safe level of humidity in 3cu.ft (0.8 cu. meter) area. When the monitor window turns pink, the silica gel is saturated. It can be regenerated in a 300 degree F (150 degree C) oven in about 3 hours. The monitor window will be blue in color when recharged.
Electron Microscopy Sciences Silica Gel Packets 10 Gram, 2¾" x 3", 91.5 cubic inch Capacity
Silica Gel-Desiccant is a fast and extra moisture absorbing agent. Meets FDA specifications for food and drug product. Provides superior absorption. Remains dry at maximum saturation. Silica gel can absorb 15% of its weight in water vapor in two hours.
Dimensions: 2¾" x 3"
Capacity: 91.5 cubic inch
Electron Microscopy Sciences Turbo Freeze Dryer Desicant Containers
Replacement part for EMS 750 Freeze Drier, EMS #91080.
Electron Microscopy Sciences Silica Gel Packets 3 Gram, 1-1/16" x 2-1/16", 24.4 cubic inch Capacity
Silica Gel-Desiccant is a fast and extra moisture absorbing agent. Meets FDA specifications for food and drug product. Provides superior absorption. Remains dry at maximum saturation. Silica gel can absorb 15% of its weight in water vapor in two hours.
Dimensions: 1-1/16" x 2-1/16"
Capacity: 24.4 cubic inch
Electron Microscopy Sciences Dextrose, Anhydrous, Reagent 500 GR
(D-Glucose)
CAS #50-99-7 C₆H₁₂O₆ F.W. 180.16
Assay: 99.8%
Electron Microscopy Sciences Silica Gel Bulk Desiccant, 2 Lbs
Changes color when it reaches max absorption capacity.
Electron Microscopy Sciences Desiccant Cartridge, Large
These desiccant cartridges can be used in desiccator cabinets or non-vacuum desiccators, analytical balance cases, and precision laboratory instruments. The clear polystyrene dish allows for instant visual inspection of the silica gel color which changes from blue to pale pink as it absorbs moisture.
A highly porous membrane covers the dish of the desiccant providing good moisture absorption. The desiccant can be regenerated by heating cartridges in an oven at 50 degree C (122 degree F) overnight or in a 150 degree C (302 degree F) oven for one hour. The silica gel is inert and non-toxic. Each cartridge is individually sealed in aluminum foil. Dispose of the cartridges after repeated use.
Electron Microscopy Sciences Silica Gel Packets 2 Gram, 7/8" x 2-1/8", 12.2 cubic inch Capacity
Silica Gel-Desiccant is a fast and extra moisture absorbing agent. Meets FDA specifications for food and drug product. Provides superior absorption. Remains dry at maximum saturation. Silica gel can absorb 15% of its weight in water vapor in two hours.
Dimensions: 7/8" x 2-1/8"
Capacity: 12.2 cubic inch
Electron Microscopy Sciences Desiccant in A Cartridge 160 mm
The desiccant in a cartridge regenerates repeatedly without degradation. These cartridges fit into the bottom of a standard glass or plastic desiccator. The cartridge consists of a durable long wearing polyester felt bag with a perforated Mylar cover sealed in place. The indicating gel beads will change their color from blue when dry to pink when moist. Saturated gel can be regenerated in a 150 degree C (300 degree F) vented oven for 3 hours or more (depending on size), until the blue color is restored.
Cartridges come individually sealed in a moisture-proof pouch ready to use.
- 1
- 2