Tissue Processors and Accessories
Tissue Processors and Accessories
Electron Microscopy Sciences EMS LYNX II Tissue Processor Electron Microscopy Kit
EM Sample Holder, EM Sample Arm, EM Carousel, Loading Jig, 24 Aluminum Containers, 72 Plastic Containers, 72 Plastic Caps, Exhaust Hose, 100 Small and large Baskets, Basket Lids (100) and more.
Electron Microscopy Sciences EMS LYNX II Tissue Processor for Microscopy
LYNX II is a batch mode, tissue processing system for histology and electron microscopy. Samples are mounted on the sample arm and reagents are loaded on the reagent carousel. Based on a selected program, the LYNX II rotates the reagent carousel until the selected reagent station is at the processing station and the sample is lowered in the reagent.
The LYNX II periodically moves the sample arm to provide agitation and applies vacuum when the agitation is not in progress. Once the programmed time in a reagent is over, the sample is raised and the next reagent is rotated in the processing station.
Simply select the processing for EM or HP or program numbers and then use the proper carousel positions and the appropriate type of reagent vials for the type of processing. The operator then loads the reagent carousel and the samples, selects the desired program and starts the run. Comes with 24 reagent vials for electron microscopy.
Electron Microscopy Sciences Acrylic Rodent Brain Matrix Rat, 300-600g, Coronal
Low cost acrylic matrices are precisely machined and highly polished to ensure reproducible results. These matrices allow the investigator to slice either coronal (perpendicular to center line) or sagittal (parallel to center line) sections through the brain at 1 mm intervals.
Size: 300-600g
Type: Coronal
Electron Microscopy Sciences EMS LYNX II Tissue Processor Histology Kit
Histo Sample Holder, Histo Sample Arm, Histo Carousel, Power Cord, Operator Manual, Histo Aluminum Containers (24), Histo Plastic Containers (36), Plastic Caps (36), Exhaust Hose, Small Cassettes (100), Note Pads, Spare Fuses.
Electron Microscopy Sciences EMS LYNX Tissue Processor Process Accelerator (LPA)
The Lynx-LPA paraffin vacuum infiltration systems was designed to allow a greater through-put of tisssue specimens without compromising the critical infiltration step. Once your initial tissues reach the first paraffin step you can transfer the cassette holder to the Lynx-Pal for vacuum infiltration while you un-burden the Lynx to start another process cycle. The LPA has 3 positions to accept three HP cassette holder which conveniently uses the same Aluminum vial as the Lynx processor to contain paraffin. Each Aluminum vial is fitted with a platform to allow the stir-bar to circulate the melted wax.
Electron Microscopy Sciences EMS Oscillating Tissue Slicer Model 4500
The EMS 4500 and 5000 Oscillating Tissue Slicer are for sectioning either fixed or fresh tissue without embedding or freezing your sample. Preparation time is reduced dramatically and the risk of distortion and artifacts associated with these procedures are eliminated. The EMS 4500 and 5000 meets the highest standards for precision and accuracy and exceeds the performance of units on the market costing twice as much.
Electron Microscopy Sciences Retriever Thermal Slide Processor Chamber Rack
Used with the Retriever benchtop thermal slide processer that is used on formalin-fixed, paraffin embedded tissues prior to immunostaining.
Electron Microscopy Sciences Retriever Thermal Slide Processor, 115 v
Retriever that solves the problem of staining formalin fixed tissues. Affordable solution to all known major problems with immunohistochemistry on paraffin sections. Ease of use combined with high reproducibility of the results will give you the best quality immunostaining.
Bench-top model for thermally processing slides of formalin-fixed, paraffin embedded tissues prior to immunostaining. Designed to ensure identical processing of all the samples during a processing cycle, as well as the identical processing of the samples in individual sessions. Preserves processed tissues.
Electron Microscopy Sciences EMS LYNX II Tissue Processor HP Cassette Holder Assembly
For use with the LYNX II Automated Tissue Processor.
Electron Microscopy Sciences EMS LYNX Tissue Processor Disposable Vials
Consumables and accessories for use with the LYNX state-of-the-art tissue processor. Disposable vials for use with the LYNX I tissue processor.
Electron Microscopy Sciences EMS LYNX Tissue Processor Loading Jig
Consumables and accessories for use with the LYNX state-of-the-art tissue processor. Loading jig for use with the LYNX I and II tissue processors.
Electron Microscopy Sciences EMS LYNX II Tissue Processor Operator Manual
For use with the LYNX II Automated Tissue Processor.
Electron Microscopy Sciences EMS LYNX Tissue Processor Basket Stem & Foot Assembly
Consumables and accessories for use with the LYNX state-of-the-art tissue processor. Basket stem and foot assembly for use with the LYNX I tissue processor.
Electron Microscopy Sciences EMS LYNX II Tissue Processor EM Carousel
For use with the LYNX II Automated Tissue Processor.
Electron Microscopy Sciences Stainless Steel Matrices Mouse, Sagital, 40 – 75g
Stainless steel matrices with 0.5 mm channel for slicing rodent brain, heart, and similar organs as thin as possible. Made of high-quality stainless steel. They can be repeatedly used, cleaned, autoclaved, and frozen. Produce fine slices. Accurate sectioning. Easy cleaning and easy handling.
Type: Sagital
Size: 40 – 75g