Electron Microscope Micromanipulators
Electron Microscope Micromanipulators
World Precision Instrument Trio 3-Axis Micromanipulator-SU-TRIO245-R
The new SU-TRIO245 is a highly stable 3-axis manipulator with 25 mm of travel on each axis. The TRIO's synthetic 4th axis can be set in software as any angle between 0 and 90º for diagonal movement. Based on a lead-screw design with a smaller overall size and footprint than most manipulators, the SU-TRIO245 is ideal for applications that require 2 pipettes in one setup or for setups where space is limited.
World Precision Instrument SU-MPC325 Motorized Micromanipulator Systems-SU-MPC325-4
The SU-MP225 represents an economical alternative to the SU-MP285 and SU- MPC365. In 2002, production and design changes allowed us to produce this motorized manipulator as a more affordable alternative to the industry standard SU-MP285. While the SU-MP225 feature set is less comprehensive than the SU-MP285, it includes the most popular features with an efficient user interface. The mechanical design utilizes a miniature stepper motor and integral anti-backlash gear head. Pre-loaded ball bearing slides provide smooth movement throughout the 25 mm of travel. The controller uses low-noise, linear-drive output circuitry identical to that found in the SU-MP285. The methodology for mounting pipette holders and headstages used with the MP-285 has been maintained in the SU-MP225 to allow for cross compatibility.
World Precision Instrument SU-MPC365 Motorized Micromanipulator Systems-SU-MPC365-2
Our new SU-MP265/M "narrow format" mechanical is designed especially for patch-slice manipulator systems that require more than 2 or 3 pipettes as well as for other setups where space is limited.
World Precision Instrument Quad 4-Axis Motorized Micromanipulator-SU-QUAD-L
The QUAD motorized micromanipulator is easy to use and features four independent axes. Each axis has a 25 mm range of motion, a digital display of position and a control box. The compact, intuitive controller takes up minimal bench space, is fan free and is easy to use. Three axes provide the X, Y, Z-orthogonal motion typical of most motorized micromanipulators. The QUAD features a true fourth axis to move the electrode coaxially at exactly the desired angle of approach. The fourth axis has 30 mm of travel that significantly extends the range of travel for the system.
World Precision Instrument SU-MPC325 Motorized Micromanipulator Systems-SU-MP225
The SU-MP225 represents an economical alternative to the SU-MP285 and SU- MPC365. In 2002, production and design changes allowed us to produce this motorized manipulator as a more affordable alternative to the industry standard SU-MP285. While the SU-MP225 feature set is less comprehensive than the SU-MP285, it includes the most popular features with an efficient user interface. The mechanical design utilizes a miniature stepper motor and integral anti-backlash gear head. Pre-loaded ball bearing slides provide smooth movement throughout the 25 mm of travel. The controller uses low-noise, linear-drive output circuitry identical to that found in the SU-MP285. The methodology for mounting pipette holders and headstages used with the MP-285 has been maintained in the SU-MP225 to allow for cross compatibility.
World Precision Instrument SU-M33A Micromanipulator-SU-MM3A-L
Successfully used in conjunction with our other micromanipulators, the SU-M33A is available separately for those in need of a small, practical instrument in applications not requiring submicron accuracy.
The SU-M33A is the right choice for tight environments which require maximum versatility within a small space. The vertical lock is ideal for locking the position of the vertical axis and increasing stability. The optional rotating base and tiltable X-axis provide even further flexibility.
World Precision Instrument Joystick Controlled Manual Micromanipulator-MMJR
Specially adapted for use with the Nanoliter Injector for oocyte injection and similar applications, this joystick-controlled micromanipulator allows an easy “steering” motion that translates normal hand movement into smooth sub-millimeter shifts. Viewed microscopically, movement of the tool-tip corresponds naturally to hand movement, so accurate resolution is intuitive and quick. All fine adjustment can be controlled by the joystick. Pivoting forward, backward or laterally gives precise x-y adjustment. For added convenience, a separate coarse control lever is also provided for quick raising and lowering. A stop screw, which is set once resolution is achieved, eliminates refocusing and streamlines repetitive work by guiding the tip to its previous focusing plane.
Electron Microscopy Sciences PS4R with UKAS certificate
These stage micrometers are available with a calibration certificate that provides traceability for the precise calibration and confirmation of accuracy of optical measuring instruments, necessary under ISO provisions. The glass discs are mounted in stainless steel slides with engraved serial numbers. Each slide is supplied in a polished wooden storage case. A UKAS accredited laboratory carries out measurements at selected points on the scales and grids and issues a calibration certificate. Reflected light stage micrometer with 0.1" scale subdivided to 0.001".
World Precision Instrument SU-MPC385 Motorized Micromanipulator Systems-505088
- Quietest electronics in the industry optimized for single channel recording
- Single controller and ROE will run two stepper motor drive manipulators
- Self-detecting, daisy-chain capability allows control of four manipulators from one 505093
- User-friendly interface: single button access to all major functions
- Easily configurable virtual 4th axis set without external computer
- Accelerated Mode for fast, manual manipulator movement
- Easy toggle selection of Mode (speed/resolution, pulsed diagonal, Accelerated Mode)
- Display indicates X, Y, Z coordinates, Mode, active manipulator
- Robotic Home and Work Position moves for easy automated pipette exchange
- Faster robotic moves than previous versions
- Definable 4th axis for coaxial pipette movement, angle selected by DIP switches
- Simple USB interface
Electron Microscopy Sciences EMS Swiss Line Wafer Handling Tweezer Style NW, 130 mm
130 mm long. B = 16 mm, C = 6 mm, M = 11 mm, N = 2 mm, R = 52 mm, S = 42 mm.
OAL: 130 mm
Tip width: B: 16 mm
Gap: N:2 mm
Tip lip: C: 6 mm
Dimensions: M: 11 mm, R: 52 mm, S: 42 mm
Electron Microscopy Sciences Porta-Vac II with Peek Tip for 6" wafers, Molded PEEK wafer tip and 9V Disposable Battery
The Porta-Vac II wafer handling toolkit comes complete with a disposable 9V battery and a wafer tip. A large switch provides easy on/off control. The internal air filter is accessable from the front of the tool, and an internal exhaust filter ensures better than Class 1 performance.
Includes: Molded PEEK wafer tip and 9V Disposable Battery
Electron Microscopy Sciences ExP Vacuum Wand Kit for 12" (300mm) wafers, Molded PEEK wafer tip, ⅛" coiled hose and stand
ExP Vacuum Wand wafer handling kits are a lower cost alternative to the Porta-Wand and Porta-Vac II systems, which share the same tips. Has a push-button to close the vacuum and release the wafer. The included stand keeps the button pressed when the wand is not in use. Comes complete with an ⅛" Inner Diameter coiled vacuum hose and a wafer tip. Must use a vacuum pump or vacuum line. Able to be used with our Vacuum Pick Up System. Comes with 1/8" coiled hose and stand.
Includes: Molded PEEK wafer tip, ⅛" coiled hose and stand
Electron Microscopy Sciences Porta-Vac II Air Intake Filters
Replacement air intake filters for Porta-Vac II.
Electron Microscopy Sciences Complete Micro Tool Set, Stainless Steel
Micro tools are forged from the finest quality stainless steel and are precision hand ground, lapped, and polished. These tools are well suited for most applications in the field of microscopic science which demands the ultimate in precision miniature tools. Set consists of all 8 tools with mounted tips, one MT handle and one alderwood storage case.
redo select columns with descriptions: Stainless Steel