Microplate Sealing Films and Tapes
Microplate Sealing Films and Tapes
Andwin Scientific BREATH-EASY MEMBRANES 100/PK
Specimen Preparation and Embedding Supplies: Wells, Optical Bottom Plates, Cell Culture Inserts: Breathable Tube Membranes: Breathe-EASY Membranes, 100/pk
Andwin Scientific TITER-TOPS 100/PK
Made with 4.4 mil polyethylene film with an FDA approved non cytotoxic acrylic adhesive, Titer-Tops is a product that is ideal for preventing the evaporation of samples, the contamination of well to well, and the spillage of samples. The film is pre-cut in 6" x 3.25" rectangular shapes with a paper liner. This product is able to withstand chemicals and thermal conditions. Its adhesive is waterproof, solvent resistant, and suitable with all plastic microtiter plates. This is also UV transparent to 250nm. It is sold in a pack of 100.
Andwin Scientific FilmStrips; seals two 8-well rows, sterile, 4 bags of 50 (200)
FilmStrips; seals two 8-well rows, sterile, 4 bags of 50 (200)
Andwin Scientific 2 mil thickness Optically Clear Sealing Film, 100/pack
2 mil thickness Optically Clear Sealing Film, 100/pack
Andwin Scientific MICROPLATE ADHESIVE FILM -40C
The microplate film offer reduced evaporation, spillage, and contamination between wells. This product also features a secure seal, which removes "edge effects" in sensitive ELISA assays. The films can also seal tissue-culture plates for short-term storage, incubation, and containment of biohazards. These can work in a temperature range from -40C to 120C. Nonsterile and non-pierceable.
Andwin Scientific TEMPPLATE SEALING FILM -40C
TempPlate;Sealing Film, -40C to +125C, sterilized, 100/PK
Andwin Scientific COLD STORAGE ADHESIVE SEALING
With a biologically inert adhesive, the cold storage adhesive sealing foil features a secure seal from -80 to 130C (-112 to 266F). This product is also able to lessen the chance of evaporation and is easily pierceable using a manual or automated pipettor tips or robotic probes. With these features, the product eliminates the probability of the generation of aerosols or cross-contamination.
Andwin Scientific AeraSeal Plate Sealing Film, Non-Sterile, 100/pk
A 140 µm thick hydrophobic porous rayon sealing film including medical-grade adhesive for tissue culture plates, bio-blocks, and 96-well plates where gas exchange is necessary for cell or bacterial growth. AeraSeal sealing films minimize cross-contamination, spillage and evaporation. They allow uniform air and CO2 exchange for all wells, unlike plate lids which favor exchange for wells near the plate edges. Dimensions: 82.6 by 142.9 mm for standard-size tissue culture plates.
Andwin Scientific ThermalSeal 2 Film
These improved films for classic thermal cycling applications consist of a 50 µm polyester film with a 41 µm layer of acrylic adhesive. Compared to the original ThermalSeal films (below), ThermalSeal 2 films offer better adhesion, reduced evaporation, longer end tabs for easier handling, and less tendency to tear during removal from the plate. Each sealing film measures 79.4 x 139.7 mm and offers sufficient sealing area for all PCR plates. Length between the perforations with end tabs removed is 125.1 mm. (Not recommended for raised-rim plates; see ThermalSeal A films below.)
Andwin Scientific RAYON FILM FOR BIOLOGICAL CULT
The Rayon Films are ideal for tissue culture plates, bio-blocks, and 96-well plates where gas exchange is necessary for cell or bacterial growth. The film is pierceable with tips or pipets for sample recovery, is non-cytotoxic, and is highly gas per
Andwin Scientific EZ-Pierce Sealing Films, Sterile
Easily pierceable, 70 µm thick, polyethylene with acrylic adhesive, EZ-Pierce sealing films allow direct sample recovery with single or multichannel pipettors and robotic probes. Dimensions are 82.6 x 142.9 mm for 96-well plates.