Single Use Bioreactor Vessels
Single Use Bioreactor Vessels
Thermo Scientific™ Standard Single-Use Bottle Assembly System, polycarbonate, 3-port cap set, 2 L
Thermo Scientific™ PETG Single-Use Bottle Assembly System includes a Nalgene Square PETG Bottle, a 38 to 430 mm ported closure with one vent filter line and one 1/8-in plugged connection line.
Thermo Scientific™ Standard Single-Use Bottle Assembly System, PETG, 2-port cap set
Thermo Scientific™ Polycarbonate Single-Use Bottle Assembly System includes a Nalgene Square Polycarbonate Bottle, a 53 B ported closure with one vent filter line and two 1/4-in plugged connection lines.
Thermo Scientific™ Standard Single-Use Bottle Assembly System, polycarbonate, 2-port cap set
Thermo Scientific™ Polycarbonate (PC) Single-Use Bottle Assembly System includes a Nalgene Square Polycarbonate Bottle, a 38 to 430 mm ported closure with one vent filter line, and one 1/8-in plugged connection line
Thermo Scientific™ Standard Single-Use Bottle Assembly System, PETG, 3-port cap set, 2 L
Thermo Scientific™ PETG Single-Use Bottle Assembly System includes a Nalgene Square PETG Bottle, a 53 B ported closure with one vent filter line, and two 1/4-in plugged connection lines
Biosurface Technologies Corp CDC Biofilm Reactor without stir plate (CBR 90-2)
The CDC Biofilm Reactor consists of eight (8) polypropylene coupon holder rods suspended from a UHMW-polyethylene ported lid. Each coupon holder rod can accommodate three (3) 1/2-inch (12.7 mm) diameter coupons, for a total of twenty-four (24) coupons. The lid (with coupon holders and coupons) is mounted in a 1-liter glass vessel with side-arm discharge port. A liquid growth media or biocide is circulated through the vessel while mixing and shear is generated by a magnetic stir bar and vane rotated by a magnetic stir plate.The CDC Biofilm Reactor is completely autoclavable and reuseable. The total liquid volume is approximately 350 ml. More than forty (40) coupon materials are available, including plastics, metals, and ceramics.
Bellco Glass, Inc. O-ring replacement kit Size: 10l Headplate o-ring - 2ea (1964-88910) 1/2" o-ring - 2ea (a554-30) 5/16" o-ring - 2ea (a542-523) 3/8" o-ring - 10ea (a523-234) 3/4" o-ring - 10ea (a542-521) Probe holder internal o-ring - 2ea (a542
O-ring replacement kit Size: 10l Headplate o-ring - 2ea (1964-88910) 1/2" o-ring - 2ea (a554-30) 5/16" o-ring - 2ea (a542-523) 3/8" o-ring - 10ea (a523-234) 3/4" o-ring - 10ea (a542-521) Probe holder internal o-ring - 2ea (a542
Chemglass Life Sciences 15L Unjacketed Bio Reactor Vessel
15L Unjacketed Bio Reactor Vessel. Vessels are constructed of heavy wall tubing and are graduated in 200mL subdivisions with numbers every 1000mL. Like-for-like replacement parts for Applikon Biotechnology and Broadley-James brands of bioreactors. Applikon is a registered trademark of Applikon Biotechnology, Inc. Broadley-James and Broadley-James Corporation are registered trademarks of Broadley-James Corporation.
Chemglass Life Sciences 3L Unjacketed Bio Reactor Vessel
3L Unjacketed Bio Reactor Vessel. Vessels are constructed of heavy wall tubing and are graduated in 200mL subdivisions with numbers every 1000mL. Like-for-like replacement parts for Applikon Biotechnology and Broadley-James brands of bioreactors. Applikon is a registered trademark of Applikon Biotechnology, Inc. Broadley-James and Broadley-James Corporation are registered trademarks of Broadley-James Corporation.
Ace Glass, Inc. 1L jacketed filter reactor body with 100mm ID grooved top flange, #80 bottom thread, 100mm IDx180mm depth, with CAPFE O-ring, 28/15 O-ring ball joint inlet/outlet connects, pressure rated at 35 psi.
1L jacketed filter reactor body with 100mm ID grooved top flange, #80 bottom thread, 100mm IDx180mm depth, with CAPFE O-ring, 28/15 O-ring ball joint inlet/outlet connects, pressure rated at 35 psi.
Ace Glass, Inc. 600mL jacketed filter reactor body with 60mm ID grooved top flange, #50 bottom thread, 83mm IDx185mm depth, with CAPFE O-ring, #11 Ace-Thred inlet/outlet connections, use with 3/8in ID tubing, pressure rated at 35 psi.
600mL jacketed filter reactor body with 60mm ID grooved top flange, #50 bottom thread, 83mm IDx185mm depth, with CAPFE O-ring, #11 Ace-Thred inlet/outlet connections, use with 3/8in ID tubing, pressure rated at 35 psi.