Particulate Detection
Particulate Detection
Electron Microscopy Sciences AirChek Air Monitoring Badge, Toluene
Airchek Badges provide an innovative, simple and effective system for monitoring vapor levels, including formaldehyde, glutaraldehyde, xylene, toluene, and isopropanol. The badges are simply clipped on to the technician's clothing and a record is kept of name, location and time, providing continuous sampling for personal monitoring and allowing the measurements required under Government regulations.Overall Length is 8 3/4" (213 mm). Overall Length is 8 3/4" (213 mm).
One badge provides continuous sampling over 8 hours. A second badge can be used to supply information for analysis of 15-minute peak exposure periods.
Use: Toluene
Electron Microscopy Sciences Bio-Pump Plus
The Zefon Bio-Pump Plus is the smallest and lightest portable battery powered IAD sampling pump available. It provides the simplest and most convenient way to sample with Air-O-Cell and Via-Cell cassettes at a flow rate of 15 LBM.
New "quick sample" feature makes sampling a breeze.
Extra long batter life allowing for over 100 samples in a single charge.
Quick-charge battery charger included (approximately 3 hours).
Programmable timer allows unattended operation.
Nothing to prepare or clean-just place the cassette on the pump, set the time and go.
Complete with both an Air-O-Cell and Via-Cell flow indicator, quick charger, 10 free Air-O-Cell cassettes and a handy carrying case.
Electron Microscopy Sciences NIGHTSEA™ Fluorescence Adapter Battery and Charger
Compact battery pack that can run the Stereo Microscope Fluorescence Adapter (SFA) all day long. The battery enables truly portable operation so that you can set up demos anywhere or explore fluorescence in the field, without having to worry about plugging into the power grid.
Just plug the battery into the SFA base instead of the usual power connector. The battery has been tested at over 8 hours of continuous operation, and it will last even longer if you turn the system off when you don't need it. Plug it into the included charger overnight to recharge.
Electron Microscopy Sciences BioCulture™ Microbial Air Sampler BioCulture Pump & Calibration Kit
This BioCulture pump features a selectable, continuous, constant sample flowrate and is simple and quiet to operate for a variety of applications. No tools are needed. Ideal for applications in IAQ surveys, mold sampling, building diagnostics, clean room sampling, hospital operating rooms, pharmaceutical compounding labs, USP 797 active air sampling compliance, and any location that needs to verify and quantify microorganism presence.
The flow rate is 30-120 LPM with an accuracy of +/-5%. Uses standard 90 mm petri dishes. Sampling head design includes 380 1 mm diameter holes and may be sterilized by autoclave or gas torch. NiCAD battery design that runs for 6.8 hours depending on flow rate, battery maintenance and back-pressure and recharge in 12 to 16 hours. The tripod mounting threads on bottom of unit allow for 90 degree sampling. Built-in timers of 1, 2, 5, 10 minutes. Includes pump, calibration head, standard 120V charger, pencil torch, carrying case & manual.
Electron Microscopy Sciences BioCulture™ BioCulture Calibration Head
The BioCulture Calibration Head is A NIST traceable venture calibrator with 1% accuracy that allow users to calibrate the flow of the BioCulture pump themselves without having to send the pump out for service of calibration. It allows flow calibration at flow rates between 30-120 LPM. It is designed for use with impellar fan typle pumps like the BioCulture, which require calibration devices with very little backpressure resistance.
Electron Microscopy Sciences mini-BUCK™ High Flow Calibrator, 120 V
The mini-BUCK Primary Flow Calibrator is the industry standard for day-to-day flow verification and calibration of your personal and environmental sampling pumps. It is also suitable for verifying rotameters, setting instrument panels, and calibrating laboratory instruments. No more lugging oversized calibration panels. No more rotameter inaccuracies. The mini BUCK is accurate at any attitude and can be used for flow measurements with sampling media. With 1/2" port.
Flow: 100cc/min 30LPM
Electron Microscopy Sciences LIBRA Pump, Charger, 240 V
The Buck LIBRA is a low cost, high performance, constant flow personal sampling pump. Suitable for use in asbestos abatement, lead sampling and industrial hygiene sampling. Designed for use with asbestos and lead abatement, the LIBRA provides full constant flow compensation using 25 mm and 37 mm cassettes. Flow rate of 0.8-4 LPM. Comes with a rechargeable NiCAD battery pack system and built-in washable stainless steel filter. It is compact, lightweight, and quiet. Full one year warranty.
Electron Microscopy Sciences AirChek Air Monitoring Badge, Glutaraldehyde
Airchek Badges provide an innovative, simple and effective system for monitoring vapor levels, including formaldehyde, glutaraldehyde, xylene, toluene, and isopropanol. The badges are simply clipped on to the technician's clothing and a record is kept of name, location and time, providing continuous sampling for personal monitoring and allowing the measurements required under Government regulations.Overall Length is 8 3/4" (213 mm). Overall Length is 8 3/4" (213 mm).
One badge provides continuous sampling over 8 hours. A second badge can be used to supply information for analysis of 15-minute peak exposure periods.
Use: Glutaraldehyde
Electron Microscopy Sciences Twin Jet Electropolisher Unipump Cyrogenic Pump
Suggested accessory for Twin Jet Electropolisher Model 501B.
Electron Microscopy Sciences BioCulture™ Microbial Air Sampler Pump, 120 V
This BioCulture pump features a selectable, continuous, constant sample flowrate and is simple and quiet to operate for a variety of applications. No tools are needed. Ideal for applications in IAQ surveys, mold sampling, building diagnostics, clean room sampling, hospital operating rooms, pharmaceutical compounding labs, USP 797 active air sampling compliance, and any location that needs to verify and quantify microorganism presence.
The flow rate is 30-120 LPM with an accuracy of +/-5%. Uses standard 90 mm petri dishes. Sampling head design includes 380 1 mm diameter holes and may be sterilized by autoclave or gas torch. NiCAD battery design that runs for 6.8 hours depending on flow rate, battery maintenance and back-pressure and recharge in 12 to 16 hours. The tripod mounting threads on bottom of unit allow for 90 degree sampling. Built-in timers of 1, 2, 5, 10 minutes. Includes pump, standard 120V charger, pencil torch, carrying case & manual.
Electron Microscopy Sciences LIBRA Pump, Charger, 120 V
The Buck LIBRA is a low cost, high performance, constant flow personal sampling pump. Suitable for use in asbestos abatement, lead sampling and industrial hygiene sampling. Designed for use with asbestos and lead abatement, the LIBRA provides full constant flow compensation using 25 mm and 37 mm cassettes. Flow rate of 0.8-4 LPM. Comes with a rechargeable NiCAD battery pack system and built-in washable stainless steel filter. It is compact, lightweight, and quiet. Full one year warranty.