Viscometer Accessories
Viscometer Accessories
Anton Paar Set of vane spindles for ViscoQC 100 & ViscoQC 300
Set of 3 stainless steel vane spindles V71, V72, V73, equipped with Toolmaster and magnetic coupling. Intended for measuring gel like or shear sensitive substances. Come with immersion marks for full or half immersion depth.Suitable for use with Anton Paar rotational viscometers ViscoQC 100 – L item NC1818559, ViscoQC 100 – R item NC1818567, ViscoQC 100 – H item NC1818569, ViscoQC 300 – L item NC1818572, ViscoQC 300 – R item NC1818576, ViscoQC 300 – H item NC1818578.
Anton Paar Measuring spindle V74 - Low volume vane spindle for ViscoQC 100 & ViscoQC 300
Stainless steel vane spindle equipped with Toolmaster and magnetic coupling. Intended for measuring gel like or shear sensitive substances. Full immersion only for very low sample volume in 25 ml beaker. Recommended 20 ml sample volume.Suitable for use with Anton Paar rotational viscometers ViscoQC 100 – L item NC1818559, ViscoQC 100 – R item NC1818567, ViscoQC 100 – H item NC1818569, ViscoQC 300 – L item NC1818572, ViscoQC 300 – R item NC1818576, ViscoQC 300 – H item NC1818578.
Anton Paar Measuring system CC26 - 26mm cup and bob measuring system for ViscoQC 100 & ViscoQC 300
Measuring system consisting of bob B-CC26 and cup C-CC26 for measurement according to ISO 3219 and DIN 53019-1. The stainless steel measuring bob is equipped with Toolmaster and magnetic coupling. A stainless steel hook connects the spindle body of the bob to the magnetic coupling. The cup consists of an anodized aluminum wall, a PEEK bottom plug and an FKM O-ring which seals the gap between wall and bottom.Requires holder for cup, either DIN Adapter item NC1818345 or PTD 80 item NC1818588Suitable for use with Anton Paar rotational viscometers ViscoQC 100 – L item NC1818559, ViscoQC 100 – R item NC1818567, ViscoQC 100 – H item NC1818569, ViscoQC 300 – L item NC1818572, ViscoQC 300 – R item NC1818576, ViscoQC 300 – H item NC1818578.
Anton Paar Measuring system CC18 - 18mm cup and bob measuring system for ViscoQC 100 & ViscoQC 300
Measuring system consisting of bob B-CC18 and cup C-CC18 for measurement according to ISO 3219 and DIN 53019-1. The stainless steel measuring bob is equipped with Toolmaster and magnetic coupling. A stainless steel hook connects the spindle body of the bob to the magnetic coupling. The cup consists of an anodized aluminum wall, a PEEK bottom plug and an FKM O-ring which seals the gap between wall and bottom.Requires holder for cup, either DIN Adapter item NC1818345 or PTD 80 item NC1818588Suitable for use with Anton Paar rotational viscometers ViscoQC 100 – L item NC1818559, ViscoQC 100 – R item NC1818567, ViscoQC 100 – H item NC1818569, ViscoQC 300 – L item NC1818572, ViscoQC 300 – R item NC1818576, ViscoQC 300 – H item NC1818578.
Anton Paar Measuring system CC12 - 12 mm cup and bob measuring system for ViscoQC 100 & ViscoQC 300
Measuring system consisting of bob B-CC12 and cup C-CC12 for measurement according to ISO 3219 and DIN 53019-1. The stainless steel measuring bob is equipped with Toolmaster and magnetic coupling. A stainless steel hook connects the spindle body of the bob to the magnetic coupling. The cup consists of an anodized aluminum wall, a PEEK bottom plug and an FKM O-ring which seals the gap between wall and bottom. Requires holder for cup, either DIN Adapter item NC1818345 or PTD 80 item NC1818588Suitable for use with Anton Paar rotational viscometers ViscoQC 100 – L item NC1818559, ViscoQC 100 – R item NC1818567, ViscoQC 100 – H item NC1818569, ViscoQC 300 – L item NC1818572, ViscoQC 300 – R item NC1818576, ViscoQC 300 – H item NC1818578.
Anton Paar V-Curve License for ViscoQC 300
Includes live measurement data in online graph window, mathematical regression models (Best fit feature, Casson, NCA/CMA Casson, IPC Paste, Bingham, Herschel-Bulkley, Power Law, Shear thinning Index and thixotropy breakdown coefficient), yield stress method and possibility to program step procedures (linking of up to 50 methods). No PC required.For mathematical regression models, DIN spindles are required: Measuring System CC12 item NC1818606, CC18 item NC1818604, CC26 item NC1818602, CC12/D18 item NC1818608, SC4-18 item NC1818611, SC4-21 item NC1818613, SC4-27 item NC1818615, DG26 item NC1818619, or DG26/SS NC1818621For the yield mode, vane spindles are required: Vane Spindle Set item NC1818340, Spindle V74 item NC1818341, Spindle V75 item NC1818342Suitable for use with Anton Paar rotational viscometersViscoQC 300 – L item NC1818572,ViscoQC 300 – R item NC1818576,ViscoQC 300 – H item NC1818578.If ordering for an existing ViscoQC 300, specify the serial number of the instrument.
Anton Paar Carrying case for ViscoQC 100 & ViscoQC 300
A plastic carrying case with padding for secure transportation of ViscoQC rotational viscometer from one sampling location to the next, as well as for storage of the instrument.Suitable for use with Anton Paar rotational viscometers ViscoQC 100 – L item NC1818559, ViscoQC 100 – R item NC1818567, ViscoQC 100 – H item NC1818569, ViscoQC 300 – L item NC1818572, ViscoQC 300 – R item NC1818576, ViscoQC 300 – H item NC1818578.
Anton Paar Low-viscosity Spindle Guard L for ViscoQC-L for ViscoQC 100 & ViscoQC 300
Spindle guard made of stainless steel AISI 316L (1.4404 / 1.4435). Comes with a fixing screw with identification """"L"""". The screw also serves as guard detection, which avoids measurement with a wrong configuration (TruGuard). For use inside wide-rimmed vessels (typically 600 mL glass beakers). Required for spindles L1 and L2.Measurement Spindles L1 and L2 included with ViscoQCSuitable for use with Anton Paar rotational viscometers ViscoQC 100 – L item NC1818559, ViscoQC 300 – L item NC1818572.
Anton Paar Measurement Spindle RH1 for ViscoQC 100-R and ViscoQC 300-R
Spindle made of stainless steel AISI 316L (1.4404 / 1.4435). Equipped with Toolmaster and magnetic coupling. Intended for use with wide-rimmed sample vessel (typically 600 mL glass beakers). If connected to ViscoQC 100-R or ViscoQC 300-R, the RH1 spindle requires the use of spindle guard R item NC1818596.Suitable for use with Anton Paar rotational viscometers ViscoQC 100 – R item NC1818567, ViscoQC 100 – H item NC1818569, ViscoQC 300 – R item NC1818576, ViscoQC 300 – H item NC1818578.
Anton Paar Disposable Measuring system Cup D18 and bob CC12 for ViscoQC 100 & ViscoQC 300
Measuring system consisting of bob B-CC12D18, holder CC18 and 100 disposable cups D18. The stainless steel measuring bob is equipped with Toolmaster and magnetic coupling. A stainless steel hook connects the spindle body of the bob to the magnetic coupling. The aluminum cup requires a holder, which is made of hard anodized aluminum.Requires holder for cup, either DIN Adapter item NC1818345 or PTD 80 item NC1818588Suitable for use with Anton Paar rotational viscometers ViscoQC 100 – L item NC1818559, ViscoQC 100 – R item NC1818567, ViscoQC 100 – H item NC1818569, ViscoQC 300 – L item NC1818572, ViscoQC 300 – R item NC1818576, ViscoQC 300 – H item NC1818578.
Anton Paar PTD 80 Peltier Temperature Device for ViscoQC 100 & ViscoQC 300
A temperature device using Peltier elements and air counter-cooling. Controls sample temperature of DIN / SSA measuring systems in the specified range. Features a fixed CAN cable for power connection and communication with ViscoQC.Use with Measuring System CC12 item NC1818606, CC18 item NC1818604, CC26 item NC1818602, CC12/D18 item NC1818608, SC4-18 item NC1818611, SC4-21 item NC1818613, SC4-27 item NC1818615, DG26 item NC1818619, or DG26/SS NC1818621Suitable for use with Anton Paar rotational viscometers ViscoQC 100 – L item NC1818559, ViscoQC 100 – R item NC1818567, ViscoQC 100 – H item NC1818569, ViscoQC 300 – L item NC1818572, ViscoQC 300 – R item NC1818576, ViscoQC 300 – H item NC1818578.
Anton Paar Measuring system DG26 - 26mm cup and bob double gap measuring system for ViscoQC 100 & ViscoQC 300
Measuring system consisting of bob B-DG26 and cup C-DG26 for measurement according to DIN 54453. The stainless steel hollow measuring bob is equipped with Toolmaster and magnetic coupling. A stainless steel hook connects the spindle body of the bob to the magnetic coupling. The cup consists of an anodized aluminum wall, an anodized aluminum bottom plug plus inner cylinder and an FKM O-ring which seals the gap between wall and bottom.Requires holder for cup, either DIN Adapter item NC1818345 or PTD 80 item NC1818588Suitable for use with Anton Paar rotational viscometers ViscoQC 100 – L item NC1818559, ViscoQC 100 – R item NC1818567, ViscoQC 100 – H item NC1818569, ViscoQC 300 – L item NC1818572, ViscoQC 300 – R item NC1818576, ViscoQC 300 – H item NC1818578.
Anton Paar Measuring system cup cover for ViscoQC 100 & ViscoQC 300
Optional PEEK cover to cover cups of DIN/SSA systemsSuitable for use with Anton Paar rotational viscometers Measuring System CC12 item NC1818606, CC18 item NC1818604, CC26 item NC1818602, CC12/D18 item NC1818608, SC4-18 item NC1818611, SC4-21 item NC1818613, SC4-27 item NC1818615, DG26 item NC1818619, DG26/SS NC1818621
Anton Paar Spindle Rack for ViscoQC Spindles
A rack made of stainless steel with 7 positions. Prevents damage to spindles, which are not in use. Suitable for any spindle type. Equipped with anti-slip rubber feet.Suitable for use with Anton Paar rotational viscometers ViscoQC 100 – L item NC1818559, ViscoQC 100 – R item NC1818567, ViscoQC 100 – H item NC1818569, ViscoQC 300 – L item NC1818572, ViscoQC 300 – R item NC1818576, ViscoQC 300 – H item NC1818578.
Anton Paar Medium-viscosity Spindle Guard R for ViscoQC 100-R and ViscoQC 300-R
Spindle guard made of stainless steel AISI 316L (1.4404 / 1.4435). Comes with a fixing screw with identification """"R"""". The screw also serves as guard detection, which avoids measurement with a wrong configuration (TruGuard). For use inside wide-rimmed vessels (typically 600 mL glass beakers). Required for spindles RH1 and RH2.Measurement Spindle RH1 item NC1818591Measurement Spindle RH2 included with ViscoQCSuitable for use with Anton Paar rotational viscometers ViscoQC 100 – R item NC1818567, ViscoQC 300 – R item NC1818576.
- 1
- 2