Glass Vacuum Manifolds
Glass Vacuum Manifolds
Chemglass Life Sciences 4-Port Airfree Schlenk Inert Gas Vacuum Manifold, Double Bank, 510mm OAL
4-Port Airfree Schlenk Inert Gas Vacuum Manifold, Double Bank, 510mm OAL. Double bank manifold available in 3, 4 or 5 port configuration. Forward facing 0-8mm Chem-Vac™ Chem-Cap valves permit easy operation of manifold inside of a fume hood. Main ports are spaced 100mm center to center with an additional 2 ports on the upper bank that can be used for gauging or sealed with AF-0210 stoppers. All connection ports are #15 o-ring joint connections that incorporate a greaseless o-ring seal. Manifold is modular in design allowing the user tremendous flexibility in performing experiments. Adapters from #15 o-ring joints to standard taper components, serrated hose connections or 3/8" Cajon fittings are available to allow the ports to be used with existing glassware. Replacement Chem-Vac™ Chem-Cap plug is listed below.
Chemglass Life Sciences 5-Port Airfree Schlenk Inert Gas Vacuum Manifold, Double Bank, Souza, 600mm OAL
5-Port Airfree Schlenk Inert Gas Vacuum Manifold, Double Bank, Souza, 600mm OAL. Unique design, double bank manifold with the valves sealed in a vertical position. This design permits the user an unobstructed view of whether the valve is in the open or closed position while also exposing the PTFE valves to less outgassing (when the front bank of the manifold is used for inert gas). The main ports are spaced 100mm center to center. All connection ports are #15 o-ring connections that incorporate a greaseless o-ring seal. Manifold is modular in design allowing the user tremendous flexibility in performing experiments. Adapters from #15 o-ring joints to standard taper components, serrated hose connections or 3/8" Cajon fittings are available to allow the ports to be used with existing glassware. Replacement Chem-Vac™ Chem-Cap plug is listed below.
Chemglass Life Sciences 4-Port Vacuum Manifold, Left Handed Trap Assembly, Double Bank, Airfree, Schlenk
4-Port Vacuum Manifold, Left Handed Trap Assembly, Double Bank, Airfree, Schlenk. Complete system consists of one 4-port vacuum/inert manifold, one pre-trap, one main trap assembly, one main trap body, two CG-150-05 #28 S.S. pinch clamps, one CG-150-08 #50 S.S. pinch clamp, one CG-150-21 #75 S.S. pinch clamp, four CG-150-04 #18-L S.S. pinch clamps, one AF-0451-05 #9 o-ring joint cap stopper, one AF-0451-21 #30 o-ring joint cap stopper, three AF-0451-08 #9 o-ring joint to 3/8" tubulation for Cajon adapters, four CG-305-12 #112 Viton o-rings, and one CG-305-32 #223 Viton o-ring.
Chemglass Life Sciences Vacuum Manifold, Right Handed, 3 Ports, 0-4mm Chem-Cap Valve, 240mm Overall width
Vacuum Manifold, Right Handed, 3 Ports, 0-4mm Chem-Cap Valve, 240mm Overall width. General purpose single bank vacuum manifold with 3 ports. Main tube is 38mm OD with a serrated hose connection, having the smallest serration 13.5mm and the largest serration 15.5mm, located at either the left or right side for vacuum connection. Ports are 0-4mm Chem-Vac Chem-Cap valves with serrated hose connections. The 0-4mm has the smallest serration 10mm and the largest serration 11mm. Ports are spaced 60mm center to center for the 0-4mm.
Azzota Corp System With 4-Branch Vacuum Filtration Manifolds
System with 4-Branch Vacuum Filtration Manifolds
Ace Glass, Inc. Manifold, air sampling, #25 Ace-Thred ends, 36inch length, (8)#7 Ace-Thred ports
Manifold, air sampling, #25 Ace-Thred ends, 36inch length, (8)#7 Ace-Thred ports
Ace Glass, Inc. Manifold, air sampling, #25 Ace-Thred to 1inch tube end, 36inchlength, (5) #7 Ace-Thred ports
Manifold, air sampling, #25 Ace-Thred to 1inch tube end, 36inchlength, (5) #7 Ace-Thred ports
Ace Glass, Inc. Vacuum manifold, 405mm long, (4) stopcock ports with 24/40inner joints
405MM 24/40 4PRT MANIFOLD
Ace Glass, Inc. Walters type manifold system including trap, featuring Ace-Thred connections and PTFE high vacuum valves
Walters type manifold system including trap, featuring Ace-Thred connections and PTFE high vacuum valves
Ace Glass, Inc. Glass manifold with three 0-4mm high vacuum, easy action stopcocks, 232mm overall length, #15 Ace-Thred™; ends
Glass manifold with three 0-4mm high vacuum, easy action stopcocks, 232mm overall length, #15 Ace-Thred™; ends
Ace Glass, Inc. Manifold, air sampling, #25 Ace-Thred to 1inch tube end, 24inchlength, (10) #7 Ace-Thred ports
Manifold, air sampling, #25 Ace-Thred to 1inch tube end, 24inchlength, (10) #7 Ace-Thred ports
Ace Glass, Inc. Manifold, air sampling, #25 Ace-Thred to 1inch tube end, 36inchlength, (7) #7 Ace-Thred ports
Manifold, air sampling, #25 Ace-Thred to 1inch tube end, 36inchlength, (7) #7 Ace-Thred ports