Electron Microscopy Conductive Tapes and Adhesives
Electron Microscopy Conductive Tapes and Adhesives
Ted Pella Inc Copper/Nickel Tape, 8mm W x 20m L, each
SEM conductive tape, electrically conductive with a clean, smooth background. Nickel is embedded in the adhesive.
Ted Pella Inc PELCO High Performance Silver Paste, 50g
Silver flakes in an inorganic silicate aqueous solution, specially formulated adhesive for demanding bonding applications.
Ted Pella Inc 0.1 X 0.1MM PELCO ESD ERGO TWZ
0.1 x 0.1mm 125mmPELCO® ESD Safe Ergo TweezersStyle 3Metal : NM-SS
Electron Microscopy Sciences Conductive Double Sided Carbon Tape
Can be used to mount particles 15-20 microns. Isolate unwoved cloth. Adhesive power/25mm: 1000 gf.
Conductive resistivity: 50ohm/sq.Inch
Thickness: 0.16 mm
Pad: 0.07 mm
Adhesive: 0.045 mm x 2
Ted Pella Inc Carbon Tape, 20mm W x 20m L
These carbon tapes are conductive and may be used conveniently for scanning electron microscopy or EDS applications. This is the same material as the PELCO Tabs™, Carbon Conductive Tabs, but in tape form. The tape form allows for special application uses such as custom sizes, cut-outs and shapes. The purity of this tape is identical to the PELCO Tabs™; only very small impurities of Al and Si may be found. Both sides of the tape have a thick conductive adhesive (conductive inner film is 35µm and the adhesive is 45µm on each side for a total of 125µm [5 mils]) with a white liner. The double adhesive and conductive design permits quick mounting of samples without using liquid or colloidal adhesives.
Ted Pella Inc COPPER COND TAPE 12.7MMX16.4M
Copper Conductive Tape, Double Sided Adhesive, 12.7mm W x 16.4m L
Ted Pella Inc CARBONTAB W/AL FOIL 12MM 100PK
Carbon Tabs with Al Foil Backing, 12 mm, 20 tabs per sheet, package of 100; TED PELLA INC mfg# 16091-12
Structure Probe Inc SPI Silver Streaker for SEM applications, 30g
The SPI Supplies Silver Streaker is a unique silver paint application system, ideal for mounting powders, granules, particles, and anything requiring minimum exposure to liquids or vapors. Pressure is applied to the sponge top applicator which then releases a thin, even discharge of silver paint. This layer is extremely thin, evaporates literally in a flash, and uses minimal silver solids for each application of the paint. The SPI Silver Streaker was actually an invention of the early workers in the Structure Probe SEM analytical services laboratories where the need for this kind of product was readily recognized.