Stirred Cells
Stirred Cells
MilliporeSigma™ RC800 Mini-Reservoir
Accessory for simplified stirred cell operation
MilliporeSigma™ Amicon™ Stirred Cells
Amicon stirred cells concentrate samples rapidly but gently, using magnetic stirring to minimize concentration polarization and shear stress-induced denaturation.
MilliporeSigma™ Solvent-resistant Stirred Cells, for 47mm Membranes
Access contents without dismantling via top plate opening. MilliporeSigma™ Solvent-resistant Stirred Cells, For 47mm Membranes is used for protein desalting, purification and concentration. The in-place disc filter is inside a glass cylinder with PTFE components for broad compatibility. Autoclavable.
MilliporeSigma™ Stirred Cells Replacement Parts
Retaining Stand Assembly for Model 8200
MilliporeSigma™ Amicon™ Stirred Cell Maintenance Kits (Stir Bar Assembly, 2 Seals, Tubing kit)
Amicon stirred cells concentrate samples rapidly but gently, using magnetic stirring to minimize concentration polarization and shear stress-induced denaturation.
MilliporeSigma™ Amicon™ Stirred Cell Seal Kits
Use with solutions up to 10% macrosolute concentration. Amicon™ Stirred Cell Seal Kit includes 3 silicone gaskets and O-rings. The Amicon stirred cell model provides high flow rates and is capable of rapid concentration or salt removal / concentration in the same unit.
Sterlitech Corporation CF042 CELL ASSEMBLY, FWD OSMSS
CF042 Cell Assembly, Forward Osmosis, Acetal Copolymer (Delrin) (CF042D-FO)
Sterlitech Corporation HP4750 Pressure Bleed Valve 2500 psig
Safe Operation: Volatile solutions can be processed safely because the Sterlitech™ HP4750 operates on standard sources of compressed air or inert gases (nitrogen, argon, etc.). This provides the user with a variable, safe and consistent supply of pressure to effect membrane separations.
Sterlitech Corporation CF042 Cell Assembly, Crossflow, Acetal Copolymer (Delrin) (CF042D)
The Sterlitech CF042 membrane cell is a lab scale cross flow filtration unit designed to provide fast and accurate performance data with minimal amounts of product, expense, and time.
CF042 Membrane Cell Product Availability:
- Cross flow cell units available in Delrin, PTFE, Stainless Steel, or Acrylic
- 1000 psi (69 bar) max operating pressure (PTFE and Acrylic versions are 400 psi)
- Active membrane area: 42 cm2
Please note: A feed flow pump is required to operate the CF042 cross flow cell unit. We recommend the Hydracell pump by Wanner Engineering, which is a positive displacement, diaphragm pump designed for high pressure, lower flow applications. When ordering, be sure to specify the power requirements for the motor. The minimum power available is 110V, 60 Hz. 220 V and 50 Hz motors are also available. There may be an additional cost if a variable speed drive is required.
Sterlitech Corporation CF042 Shim Assortment Pack (Stainless Steel): Includes 1ea (2 mil, 3 mil, 4 mil, 5 mil); 3ea (10 mil, 15mil)
CF042 Shims (Stainless Steel). Size: 9.207 x 4.572 cm for use in CF042.
Assortment pack, mix and match to make the optimal thickness. (a) 1 of 2 mil (0.051 mm); (b) 1 of 3 mil (0.076 mm); (c) 1 of 4 mil (0.102 mm); (d) 1 of 5 mil (0.127mm); (e) 3 of 10 mil (0.254mm); (f) 3 of 15 mil (0.381mm);