Hybridization Tubes
Hybridization Tubes
Fisherbrand™ Hybridization Tubes
Fits FisherBiotech™ Hybridization Incubator rotisseries and most rotisseries that accept standard 35 or 70mm diameter tubes.
DWK Life Sciences Wheaton™ Hybridization Bottles
For use in nucleic acid and protein blotting procedures that require a minimum of probe solution
DWK Life Sciences Wheaton™ Hybridization Rack
Holds up to 6 hybridisation bottles
Corning™ PYREX™ Hybridization Tubes
For use in hybridization incubators with rotators
DWK Life Sciences Kimble™ Kontes™ Hybridization Tubes
Made of Type I, Class A borosilicate glass
Boekel Scientific™ Hybridization Glass Bottles for Boekel Little Shot Oven
For use with Boekel Little Shot Oven, these glass hybridization bottles fit the standard carousel and help maintain the perfect temperature and mixing for all applications.
Cole-Parmer™ HI-200 Series Hybridization Incubator Accessory, Tube
HI-200 Series Hybridization Incubator Tubes are versatile and are available in multiple tube formats; mix and match sizes within an instrument to cater for different throughputs, users and applications. Glass hybridization tubes reduce volumes, simplify washing and improve signals.
Chemglass Life Sciences Bottle, Hybridization, 35 x 100mm, GL-45, Red Cap
Bottle, Hybridization, 35 x 100mm, GL-45, Red Cap. Heavy wall bottle used in hybridization incubators or ovens with rotators. An alternative to plastic bags or boxes, the membrane is rolled and placed into the bottle which is secured in a rotisserie. The membrane is saturated and drained during each revolution, resulting in even exposure of the blots to probe or wash solutions. Bottle fits most hybridization equipment and has straight interior walls for easy membrane placement and removal, as well as decanting of hybridization solutions. The red plastic cap has a PTFE faced liner and a working temperature of 180C. Dual chamber bottle has a capped opening at each end with a solid glass wall in the center to divide the bottle into two equal compartments.
Chemglass Life Sciences Bottle, Hybridization, 35 x 250mm, GL-45, Blue Cap
Bottle, Hybridization, 35 x 250mm, GL-45, Blue Cap. Heavy wall bottle used in hybridization incubators or ovens with rotators. An alternative to plastic bags or boxes, the membrane is rolled and placed into the bottle which is secured in a rotisserie. The membrane is saturated and drained during each revolution, resulting in even exposure of the blots to probe or wash solutions. Bottle fits most hybridization equipment and has straight interior walls for easy membrane placement and removal, as well as decanting of hybridization solutions. The blue cap has a silicone sealing ring and a working temperature of 140C. Dual chamber bottle has a capped opening at each end with a solid glass wall in the center to divide the bottle into two equal compartments.
Research Products International Corp Secure-Seal Hybridization Chambers, Inside Dimensions 20mm Diameter, 25 x 25 Outside Dimensions, 500ul Volume, 40 per Package
Secure-Seal Hybridization Chambers form peel-and-stick enclosures on glass microscope slides. Bond to glass in seconds and remove easily, even after heating. Isolate specimens for hybridization assays, large or multiple specimens, and genomic arrays. Leak-proof chambers are temperature resistant and eliminate evaporation. Chambers provide optimum surface volume for hybridization assays. Minimize friction, promote reagent mixing and facilitate uniform hybridization. Sealable access ports allow addition and removal of reactants.
Chemglass Life Sciences Bottle, Hybridization, 35 x 300mm, GL-45, Blue Cap
Bottle, Hybridization, 35 x 300mm, GL-45, Blue Cap. Heavy wall bottle used in hybridization incubators or ovens with rotators. An alternative to plastic bags or boxes, the membrane is rolled and placed into the bottle which is secured in a rotisserie. The membrane is saturated and drained during each revolution, resulting in even exposure of the blots to probe or wash solutions. Bottle fits most hybridization equipment and has straight interior walls for easy membrane placement and removal, as well as decanting of hybridization solutions. The red plastic cap has a PTFE faced liner and a working temperature of 180°C. The blue cap has a silicone sealing ring and a working temperature of 140°C.
Chemglass Life Sciences Bottle, Hybridization, 35 x 150mm, GL-45, Red Cap
Bottle, Hybridization, 35 x 150mm, GL-45, Red Cap. Heavy wall bottle used in hybridization incubators or ovens with rotators. An alternative to plastic bags or boxes, the membrane is rolled and placed into the bottle which is secured in a rotisserie. The membrane is saturated and drained during each revolution, resulting in even exposure of the blots to probe or wash solutions. Bottle fits most hybridization equipment and has straight interior walls for easy membrane placement and removal, as well as decanting of hybridization solutions. The red plastic cap has a PTFE faced liner and a working temperature of 180°C. The blue cap has a silicone sealing ring and a working temperature of 140°C.