Air-Purifying Respirator Cartridges and Filters
Air-Purifying Respirator Cartridges and Filters
Air-purifying respirator cartridges and filters are installed in reusable half-mask or full-facepiece respirators to provide protection from airborne contaminants. Products are designed to protect against a variety of individual contaminants or combinations of contaminants, including dusts, particles, mists, aerosols, fumes, gases, and/or vapors.
Some products protect against both particulate and gaseous contaminants, however, there is no single filter and cartridge combination that protects against all substances.
Correct product selection depends on the environment(s) in which the product will be used and the type(s) of hazard(s) or risk(s) expected in the selected environment(s). NIOSH-rated cartridges and canisters use a color-coding system for secondary identification.
Product service life depends on many factors, including environmental conditions, breathing rate, cartridge filtering capacity, and the quantity of contaminants in the air. Regulatory compliance details for each filter and filter/cartridge package can be obtained at the individual product level and should be carefully scrutinized during selection.
3M™ Particulate Filter 2078, P95 Respiratory Protection/Nuisance/Acid/Gas/Organic Vapor
NIOSH approved for environments containing certain oil and non-oil based particles. 3M recommended for relief against nuisance levels of organic vapor/acid gases and for ozone protection up to 10X OSHA PEL.
3M™ Particulate Filter 2091, P100
The 3M™ Particulate Filter 2091, P100 helps provide respiratory protection against exposure to lead, asbestos, cadmium, arsenic, and MDA. This filter helps protect against a wide range of oil and non-oil based particulate contaminants.
3M™ 6000 Series Cartridges
NIOSH-approved cartridges for use with 3M™ full and half facepiece respirators 6000, 7000 and FF-400 Series.
Dentec Safety™ N95 Respirator Filter Pads
Dentec Safety™ N95 Respirator Filter Pads features an ultra thin design that will fit under any grinding shield or welding helmet.
3M™ Filter/Adapter/Retainer Kit 6N01, N95
Start-up kit contains 40 3M™ Particulate Filters 5N11, N95; 20 3M™ 501 Filter Retainers and 20 3M™ 603 Filter Adapters. The kit is enough for 10 separate users to have 1 initial filter pair and 1 filter pair change out.
3M™ Secure Click™ Respirator Multi-gas/Vapor Cartridge
The Secure Click™ Multi-Gas/Vapor Cartridge is NIOSH-approved for use against certain organic vapors, sulfur dioxide, hydrogen chloride, chlorine/ammonia/methylamine/formaldehyde, chlorine dioxide, hydrogen fluoride or hydrogen sulfide.
3M™ Secure Click™ Respirator P100 Multi-gas/Vapor Cartridge/Filter
The Secure Click™ P100 Multi-Gas/Vapor Cartridge/Filter is NIOSH-approved to help provide respiratory protection against certain multi-gas/vapors and oil and non-oil based airborne particulate contaminants.
3M™ Secure Click™ Respirator P95 Particulate Cartridge and Hydrogen Fluoride with Nuisance Acid Gas Relief
Secure Click™ Hard Case D9000 Series Particulate Filters are approved for use with Secure Click™ Respirators in environments containing certain particles in the chemical manufacturing industry.
3M™ Secure Click™ Respirator Organic Vapor P100 Cartridge/Filter
The Secure Click™ Organic Vapor P100 Cartridge/Filter is NIOSH-approved to help provide respiratory protection against certain organic vapors and oil and non-oil based airborne particulate contaminants.
3M™ Secure Click™ Respirator P95 Particulate Filter with Nuisance Level Organic Vapor/Acid Gas Relief
3M™ Secure Click™ Hard Case D9000 Series Particulate Filters are approved for use with 3M™ Secure Click™ Respirators in environments containing dust, mists, fumes, or mold.
3M™ Secure Click™ Respirator P100 Particulate Filter with Nuisance Level Acid Gas Relief
Secure Click™ Hard Case D9000 Series Particulate Filters are approved for use with 3M™ Secure Click™ Respirators in environments containing mold.