Heater Controllers
Heater Controllers
Heater controllers and temperature controllers, also known as process controllers, provide control to a variety of heaters, coils and perfusion heating devices without extensive operator involvement.
There are different types of temperature controllers available in the market, such as on-off controllers, proportional controllers, PID controllers and multi-loop PID controllers. The type of input sensor, the type of output and number of outputs, and the method of control should be considered when choosing a controller to integrate into a control system.
Some controllers use:
- A simple on/off switch for predetermined temperature levels
- Proportional control, which provides some level of feedback
- Proportional-integral-derivative (PID) units with a complete feedback loop that assesses a number of process variables for more accurate temperature control
Heater controllers may be designated for a single type of heater or may be multipurpose. They may accommodate more than one heating device, with two or more separate and independent circuits. Some controllers have thermostats and can operate as a back-up to other heating processes. Controllers may be equipped with timers or alarms, and some can accept various temperature probes as input.
DWK Life Sciences Kimble™ Kontes™ Power Control for Sand Bath Heating Mantle
Ideal for microscale applications
Thermo Scientific™ Stepless Temperature Controller
Economical controller for heat tape applications
BD MAX™ Prewarm
Required for processing BD MAX™ CT/GC/TV and BD MAX™ Enteric Parasite Panel on the BD MAX™ System.
BriskHeat™ SDC Benchtop Temperature Controllers
Easy-to-use programmable digital controller with self-contained plug-and-play design
Chemglass Life Sciences OptiChem Heating Mantle Controller, Single Circuit, 10A, 1200 Watts, 120VAC
OptiChem Heating Mantle Controller, Single Circuit, 10A, 1200 Watts, 120VAC. Our controllers feature solid-state proportional voltage power control in a compact benchtop design. Controllers provide accurate manual control of heating mantles, tapes and all other resistive loads with an adjustable output range from 5 to 100% of the rated voltage. All units are supplied with a 6ft separable power cord, a grounded, 3-wire receptacle and lighted power switch. 3-Year warranty.
Chemglass Life Sciences Dual Temperature Controller, J-Kem, Gemini, Type ""J"" (-0C to 800C), Complete
Dual Temperature Controller, J-Kem, Gemini, Type "J" (-0C to 800C), Complete. J-Kem Scientific Gemini-2 dual temperature controller permits control of two independent reactions with digital displays for both channels. Each channel is 1200 Watts MAX (1800 Watts total), 15 Amps @ 120VAC, and features advanced microprocessor PID control algorithm. Channel one also has a 100 hour digital timer. Safety features include 100% solid state, double fused, audible error alarm, and over temperature circuitry that disconnects power if an over temperature condition occurs.PLEASE NOTE: THE TYPE T, J AND K CONTROLLERS ARE SUPPLIED COMPLETE WITH: (2) 1/8 DIAMETER X 12 LONG PTFE COATED THERMOCOUPLES, (2) 10FT COILED EXTENSION CORDS, AND (2) 14/20 PTFE THERMOCOUPLE ADAPTERS. THE RTD UNIT IS THE CONTROLLER ONLY.Specifications:Dimensions: 3.5" H x 7.75" W x 8.75" DPower: 15 Amps @ 120VAC, 1200 Watts MAX/Channel, 1800 Watts (Total)
HARVARD BIOSCIENCE INC TC-324C HEATER CONTROLLER
Total order minimum requirement of $500 per supplier requirements. A $25.00 order fee will be applied if entire order is less than the $500 minimum requirement.
Chemglass Life Sciences Temperature Controller, Chemglass, PID, Type K, CONTROLLER ONLY
Temperature Controller, Chemglass, PID, Type K, CONTROLLER ONLY. Economical temperature controller for applications that do not require the precise temperature (± 0.1°). Auto tune PID process controller for use with Chemglass oil baths or mantles up to 5L. Controller has 1500 watts of power and will control temperatures to ± 1.0°C.
Chemglass Life Sciences Temperature Controller, Chemglass, PID, Type T, CONTROLLER ONLY
Temperature Controller, Chemglass, PID, Type T, CONTROLLER ONLY. Economical temperature controller for applications that do not require the precise temperature (± 0.1°). Auto tune PID process controller for use with Chemglass oil baths or mantles up to 5L. Controller has 1500 watts of power and will control temperatures to ± 1.0°C.
Chemglass Life Sciences Temperature Controller, Chemglass, PID, Type J, CONTROLLER ONLY
Temperature Controller, Chemglass, PID, Type J, CONTROLLER ONLY. Economical temperature controller for applications that do not require the precise temperature (± 0.1°). Auto tune PID process controller for use with Chemglass oil baths or mantles up to 5L. Controller has 1500 watts of power and will control temperatures to ± 1.0°C.
Chemglass Life Sciences Dual Temperature Controller, J-Kem, Apollo, Type ""J"" (0C to 800C), Complete
Dual Temperature Controller, J-Kem, Apollo, Type "J" (0C to 800C), Complete. J-Kem Scientific Apollo dual temperature controller features two independent temperature controllers in a single cabinet. Each independent channel has its own high power outlet, 100 hour timer to turn heating/cooling on or off at a user set time, and solid state over temperature protection circuit. Temperature ramping and serial communications are also provided with this unit.PLEASE NOTE: THE TYPE T, J AND K CONTROLLERS ARE SUPPLIED COMPLETE WITH: 1/8 DIAMETER X 12 LONG PTFE COATED THERMOCOUPLE, 10FT COILED EXTENSION CORD, AND A 14/20 PTFE THERMOCOUPLE ADAPTER. THE RTD UNIT IS THE CONTROLLER ONLY.Specifications:Dimensions: 4" H x 8" W x 9" DPower: 10 Amps @ 120VAC, 1200 Watts MAX/Channel, 1800 Watts (Total)
- 1
- 2