Full-Face Respirators
Full-Face Respirators
Full-face respirators are reusable air-purifying devices that protect both the respiratory tract and eyes from exposure to harmful, irritating substances including dusts, fogs, fumes, mists, smokes, sprays, vapors, gases, and other airborne particulates. They feature a flexible seal that ensures a sealed fit around the full perimeter of the face. Full-face respirators have an Assigned Protection Factor (APF) of 50, and may be constructed of silicone, thermoplastic, or rubber materials to allow repeated cleaning, disinfection, storage, and reuse.
Full-face respirators are designed to be used with National Institute for Occupational Safety and Health (NIOSH)-rated particulate filters, and/or cartridges. Filters and cartridges are designed to be worn with a specific respirator and are not interchangeable with every model or type of respirator facepiece.* Filters and cartridges may be securely attached using a bayonet (pin-and-socket) or threaded (screw-type) fitting.
Full-face respirators are available in x-small, small, medium, and large sizes. They may be worn with hard hats, hoods, or face shields. Strap harnesses or ratchet suspensions ensure a secure fit to the wearer’s head and are typically constructed of a durable, flexible material such as polyester, elastic, nylon, or rubber. Straps and harnesses should be tightened or loosened with the respirator in place.
Gas masks are air-purifying respirators equipped with a full-face respirator or mask, and include cartridges or canisters to filter specific harmful or irritating chemical gases from the air. Typically worn by first responders, law enforcement, and counter terrorism personnel, they are only effective when used with filters and/or cartridges specifically suited for protection from gaseous biological or chemical substances.
The Occupational Safety and Health Administration (OSHA) requires fit testing prior to first-time use, and on a consistent annual basis thereafter. Wearers should always inspect the respirator before each use to determine whether or not the respirator is complete and undamaged and to verify that the sealing material properly adheres to the face.
*Regulatory compliance details and filter/cartridge compatibility can be obtained at the individual product level.
3M™ Full Facepiece 6000DIN Series Respirator
Lightweight full-facepiece respirator with built-in DIN port adapter assembly features a well-balanced design and silicone faceseal for enhanced comfort, durability and ease of cleaning. Available in air-purifying, supplied air, and powered air purifying respirator modes.
3M™ 6000 Series Reusable Full Facepiece Respirator
Requires limited maintenance time—reducing need for expensive repair programs
Scott Safety™ AV-3000™ Facepiece with SureSeal
Top-Down Convertibility design allows a single facepiece for APR, PAPR, SAR and SCBA respirators.
Moldex™ 9000 Series Full Face Respirator Facepiece
At less than 13 ounces, the 9000 Series respirator is ultra-lightweight. Workers will appreciate the comfort and longer wearability and employers will benefit from increased user acceptance.
3M™ Secure Click™ Full Facepiece Reusable Respirator
The Secure Click™ Full Facepiece Reusable Respirator helps protect against particulates and/or a wide variety of gases and vapors when used with approved Secure Click™ filters and cartridges.
Scott Safety™ Promask 25 Facepiece
Promask 25 full facepiece respirators are ergonomically designed to be lightweight and well-balanced, suitable for use in any industrial or manufacturing environment.
3M™ FR-7800B Respirator Full Facepieces
Integral speaking diaphragm improves voice amplification and clarity
3M™ 7800S Reusable Full Facepiece
Can be used with 3M Series 2000 or 7093 filters or Series 6000 cartridges
3M™ Ultimate FX FF-400 Series Full Facepiece Respirator
Rugged facepiece equipped with a large Scotchgard™ coated lens is designed to provide flexibility in extreme environments.
Dentec Safety™ Comfort-Air™ Series 130M Full Facepiece Respirators with Inner Mask
Special compression silicone full facepiece respirators with inner mask feature large inhalation valves that allow for maximum inhalation. Available to purchase with or without cartridges and filter assemblies.
Bullard™ Spectrum™ Replacement Facepieces
For use with PA40 series powered air purifying respirators
MSA™ Advantage™ 4000 Full Facepiece Respirators, Push-To-Connect Adapter
Full-face reusable respirators with push-to-connect adapter are ideal for a variety of applications. Advantage™ 4000 series is compatible with several MSA respirator models, including air-purifying respirators, supplied-air respirators and powered air-purifying respirators.
MSA™ Advantage™ 4000 Full Facepiece Respirators, Adapter Not Included
Full-face reusable respirators are ideal for a variety of applications. Advantage™ 4000 series is compatible with several MSA respirator models, including air-purifying respirators, supplied-air respirators and powered air-purifying respirators. Adapter NOT included.
Dräger™ X-plore™ 5500 PC Full Face Mask
The Dräger™ X-plore™ 5500 EPDM full face mask is the right solution for environments that require increased respiratory protection and a clear field of vision