Labconco™ XPert™ Nano Enclosures: 3 ft. Width With Built-in Ionizer

Keep hazardous powders and particulates contained during procedures with a Labconco XPert™ Nano Enclosure.

Catalog Number	Mfr. No.	Hertz	Voltage
22-167-536	Labconco™ 3887362	50 Hz	230 V
22-167-534	Labconco™ 3887360	60 Hz	100 V

Description

Room air is pulled into the enclosure through the front, flows to the baffle and finally passes through a 99.99% ULPA exhaust filter before returning to the laboratory or cleanroom. Features built-in blower and Guardian™ airflow monitor. With built-in ionizer; separate filtered exhauster is not required.

• Ergonomic air foil with aerodynamic Clean-Sweep™ airflow openings; side spring pin releases air foil for cleaning
• Upper dilution air supply and containment sash foil with side-entry air foils
• Zone-perforated, rear baffle pivots down and removes for cleaning
• Exhaust ULPA filter, 99.99% efficient on 0.12μm particles; accessible from top for leak scanning of entire surface
• True bag-in/bag-out filter disposal system (requires certified technician)
• Built-in blower with dynamically balanced, vibration-isolated motorized impeller and speed control
• 40% Blower reserve allows speed adjustment (by certified technician) as filter loads
• Pressure gauge to monitor filter loading
• Guardian Airflow Monitor continuously monitors airflow; features visual and audible alarms if airflow is outside setpoint range

Construction

• Choice of interior depth (depending on width selected): 50cm (23.4 in.) or 76cm (30 in.)
• Type 304 stainless-steel interior sides, baffle, air foil and integral work surface
• Glacier white and gray, dry powder epoxy-coated aluminum and steel exterior
• Prewired fluorescent lamp and switches for blower and light
• 0.25 in. (0.6cm) Thick tempered safety glass front sash
• 24cm (9.45 in.) Sash opening height on 3 ft. models
• Ergonomically angled and hinged sash pivots upward, locks in up position; wiping seal contains contaminants
• Two utility ports for pass-through of electrical cords

Specifications

• Sash Opening: 9.4 in.
• At 100fpm Exhaust: 220cfm
• At 100fpm Noise: 58-61dbA
• At 80fpm Exhaust: 175cfm
• At 80fpm Noise: 53-57dbA
• At 60fpm Exhaust: 130cfm
• At 60fpm Noise: 48-53dbA

Ideal for nanoparticle manipulation and dry powder chemical handling

Order Info

Optional accessories include canopy connection, remote blowers, ductwork

Compliance

SEFA 1-2002; Modified ASHRAE™ 110-1995; ANSI™ Z9.5-1993; UL 3101-1/61010-1; CAN/CSA C22.2 No. 1010.1; CE Conformity Marking (230V models)

Specifications

• Product Type: Enclosure
• Material: Steel
• Color: Glacier White, Gray
• Depth (English) Interior: 23.5 in.
• Depth (Metric) Interior: 59.69 cm
• Exhaust: ULPA filter
• Height (English): 38.3 in.
• Height (English) Sash Opening: 9.4 in.
• Height (Metric) Sash Opening: 24 cm
• Length (Metric): 73.9 cm
• Volume (English) Exhaust: 130 to 220 cfm
• Width (Metric): 91.4 cm

• Lighting Type: Fluorescent
• Chamber Material: Epoxy Coated Aluminum
• Depth (English): 29.1 in.
• Depth (Metric): 74 cm
• Dimensions (L x W x H): 29.1 x 36 x 38.3 in. (73.9 x 91 x 97 cm)
• For Use With (Application): Nanoparticle manipulation and dry powder chemical handling
• Height (English) Interior: 26.5 in.
• Height (Metric): 97 cm
• Length (English): 29.1 in.
• Noise Level: 58 to 61 dBA
• Width (English) Interior: 34.8 in.
• Width (Metric) Interior: 88.39 cm