Thermo Scientific™ Vacuum Ovens

Achieve maximum temperatures of 220°C (428°F) with this flexible oven, while benefiting from two control configurations and display options.

Supplier:  Thermo Scientific™ 3608

Catalog No. 13-261-283

Description

Achieve maximum temperatures of 220°C (428°F) with Thermo Scientific™ Vacuum Ovens, while benefiting from two control configurations and display options. These ovens feature independent vacuum and purge needle valves. Radiant warm-wall heating system optimizes uniformity and conserves chamber space for drying, curing, vacuum embedding and plating applications.

• 3in. (7.6cm) glass wool insulation prevents heat loss
• Silicone door gasket and positive latch door maintain seal at all vacuum levels
• Polycarbonate safety shield protects door glass
• Vacuum level is displayed on gauges from 0 to 30in. Hg
• Vacuum and air lines are corrosion-resistant, stainless-steel tubing for optimum chamber cleanliness and long-term performance
• With two removable stacking aluminum shelves
• Easy-to-clean Type 304 stainless-steel interior chamber
• Powder-coated, heavy-gauge steel exterior for durability
• Front-mounted, three-way valve for evacuation, venting and purging of inert gases (e.g., Nitrogen or Argon) with vacuum fittings on the front of the unit

3606 Models

• Hydraulic thermostat temperature control ±1.5°C with a uniformity of ±5°C at 100°C, 25in.Hg
• Built-in overtemperature protection
• Top-mounted, independent evacuation and venting vacuum fittings

3608 Models

• Hydraulic thermostat temperature control ±1.5°C with a uniformity of ±5°C at 100°C, 25in.Hg
• Built-in overtemperature protection
• Front-mounted three-way valve for evacuation, venting and purging of inert gases (e.g., Nitrogen or Argon) with vacuum fittings on the front of the unit

Model 3618P Models

• Programmable microprocessor-based PID temperature control
• Regulates to ±0.2°C with uniformity of ±2.4°C at 100°C, 25in.Hg
• Runs at a single setpoint or uses a 24-step program of ramps and dwells
• 0.25in. compression fittings on left side, require 0.25in. O.D. copper or stainless-steel tubing
• Front-mounted three-way valve for evacuation, venting and purging of inert gases (e.g., nitrogen or argon) with vacuum fittings on the front of the unit

Ordering Information:

Digital Units in Torr and Microns available separately (must be factory installed)

Requires:

Vacuum fittings require 0.25in. (0.6cm) I.D. tubing.

Specifications

• Capacity (English): 0.7 cu.ft.
• Description: 19.8L (0.7 cu. ft.); 120V; 600w; 5A; Dial display
• Temperature (Metric): Ambient +10° to 220°C
• Display: Bimetallic Thermometer with 5°C increments
• No. of Shelves: 2
• Temperature Resolution: ±1.0°C
• Vacuum Range: 0 to 30 in.Hg
• Dimensions (L x W x H): 16 x 19.8 x 16.25 in. (40 x 50 x 41 cm)
• Length (Metric): 40 cm
• Width (English) Interior: 10 in.
• Width (Metric) Interior: 25 cm
• Height (English) Interior: 10 in.
• Height (Metric) Interior: 25 cm
• Depth (Metric) Interior: 30 cm
• Shipping Weight (Metric): 59 kg
• Voltage: 120 V
• Amperage: 5 A

• Chamber Material: Stainless Steel
• Capacity (Metric): 19.8 L
• Type: OTP
• Material: Powder-coated Heavy-gauge Steel
• Shelf Material: Aluminum
• Temperature Uniformity: ±6.0°C at 100°C 25 ft.Hg
• Dimensions (D x W x H) Interior: 12 x 10 x 10 in. (30 x 25 x 25 cm)
• Length (English): 16 in.
• Width (English): 19.8 in.
• Width (Metric): 50 cm
• Height (English): 16.25 in.
• Height (Metric): 41 cm
• Depth (English) Interior: 12 in.
• Shipping Weight (English): 130 lb.
• Electrical Requirements: 120 V 50/60 Hz
• Wattage: 600 w
• Frequency: 50/60 Hz

Disclaimer to internal research use restriction: Any restrictions on the purchaser to utilize the product(s) for internal research purposes only does not apply to the product(s) on the web pages associated with this statement.