MSA™ Calibration Gas Cylinders

Each lightweight calibration gas cylinder is supplied with an individual certificate of analysis and Material Safety Data Sheet (MSDS).

Supplier:  MSA™ 710414

Catalog No. 19-120-1215

Description

MSA certifies that the gas mixture in each cylinder has been prepared gravimetrically, using NIST™ traceable weights.

• For calibration of MSA instruments, each cylinder lists the proper instrument response settings
• For calibration of other manufacturers' instruments, each calibration cylinder lists the actual gas fill in the cylinder
• A lot number and nominal value of the gas constituents is reported on each cylinder label in percent by volume, percent by mass, ppm mass or volume
• The uncertainty statement of the specified nominal value is also listed

Order Info

Model RP Cylinders for Reactive Gases: Pressure, 500psig; size, 13.75L x 3 in. diameter (34.9 x 7.6cm); weight, 1 lb. 11 oz. (0.76kg); aluminum construction. Model RP Cylinders for Nonreactive Gases: Pressure, 1000psig; size, 13.75L x 3 in. diameter (34.9 x 7.6cm); weight, 2 lb. 13 oz. (1.27kg); steel construction. When using MSA calibration gas to calibrate non-MSA instruments, you must refer to the manufacturer's instruction manual for proper instrument response.

Specifications

• Capacity (English): 15.32 gal.
• Certifications/Compliance: DOT 39
• Diameter (English): 3 in.
• Components Measured: Hydrogen Sulfide in Nitrogen
• Type: Calibration Testing Gas Cylinder
• Length (Metric): 34.9 cm
• Weight (English): 1 lb.

• Capacity (Metric): 58 L
• Concentration: 5ppm
• Diameter (Metric): 7.6 cm
• For Use With (Equipment): Model RP Calibration Cylinder
• Length (English): 13.75 in.
• Pressure Range: 500psi
• Weight (Metric): 0.45kg

Safety and Handling

ShelfLife : 24 Months