Thermo Scientific™ Lindberg/Blue M™ Vacuum Ovens

Benefit from a digital control, built-in over-temperature protection and a flexible vacuum/purge/release system for a range of applications with these ovens.

Supplier:  Thermo Scientific™ VO914A1

Catalog No. 13-258-13

Description

Benefit from a digital control, built-in over-temperature protection and a flexible vacuum/purge/release system with Thermo Scientific™ Lindberg/Blue M™ Vacuum Ovens. These ovens work well with a range of applications including drying, curing, outgassing, aging, process control and other applications requiring elevated temperature in reduced atmospheres or vacuum/purge with nonflammable and inert atmospheres.

Single-Setpoint Digital Microprocessor Control

• Maximum temperature: 260°C (500°F) with nominal uniformity of ±3.5% of setpoint
• Simultaneous LED display of setpoint and actual temperature with push-button view; resolution to within 1°C
• Keypad data entry and pull-out control module for easy service
• Independent overtemperature safety system factory set with reset pushbutton

Vacuum System

• 1in.(2.54cm) manifold, chamber rear, exterior, connects to pump or in-house vacuum source
• With inert gas injection valve, fresh air inlet, vacuum exhaust port, controllable vacuum release vent port
• 1000 microns (1 torr) capacity
• Vacuum gauge, vacuum, gas and inlet valves located on front

Construction

• Corrosion-resistant stainless-steel cabinet includes three aluminum shelves with painted or stainless-steel finish
• Rear-mounted vacuum manifold connects to pump (not included) or in-house vacuum source
• Low-watt heating element extends oven life
• Heavy-gauge steel, dual-wall construction with fiberglass insulation for minimum heat loss in walls and door
• High-temperature silicone gasket is specially molded for a positive seal
• Magnetic latch for positive door seal (4.5 cu. ft. capacity models include mechanical latches)
• Viewing windows: 0.5in.(1.3cm) thick in two smaller capacity models or 0.75in.(1.9cm) thick in 4.5 cu. ft. model; permit observation of work in progress without loss of heat
• Stainless-steel exterior models come with double door—a solid outer door over inner window door

Includes:

Power cord and aluminum shelves (number of shelves based on model; see ordering table)

Warranty and Services

1 year (parts and labor)

Specifications

• Capacity (English): 0.65 cu.ft.
• Chamber Material: Corrosion-resistant Stainless Steel
• Description: 18.6L; 120V; 750w; Painted cabinet; 1 door, 3 shelves
• Temperature (Metric): 6°C to 260°C
• Display: LED
• No. of Shelves: 3
• Safety Features: Overtemperature Safety System
• Temperature Uniformity: ±3.5°C
• Dimensions (D x W x H) Interior: 14 x 9 x 9 in. (36 x 23 x 23 cm)
• Length (English): 23 in.
• Width (English): 18 in.
• Width (Metric): 46 cm
• Height (English): 26 in.
• Height (Metric): 66 cm
• Depth (English) Interior: 14 in.
• Shipping Weight (English): 150 lb.
• Electrical Requirements: 120 V 50/60 Hz
• Wattage: 750 w

• Certifications/Compliance: UL listed
• Controller Type: Digital Microprocessor Control
• Capacity (Metric): 18.6 L
• Type: Digital, OTP
• Material: Painted Steel
• Ports: Inert gas port, vacuum port and vent port
• Temperature Resolution: ±1°C
• Vacuum Range: 1 x 10^-2 torr (10 microns)
• Dimensions (L x W x H): 23 x 18 x 26 in. (58 x 46 x 66 cm)
• Length (Metric): 58 cm
• Width (English) Interior: 9 in.
• Width (Metric) Interior: 23 cm
• Height (English) Interior: 9 in.
• Height (Metric) Interior: 23 cm
• Depth (Metric) Interior: 36 cm
• Shipping Weight (Metric): 68 kg
• Voltage: 120 V
• Frequency: 50/60 Hz