BriskHeat™ Beaker Heaters with SDC Digital Temperature Controllers

Ideal for oil bath and laboratory applications. BriskHeat Beaker Heater with SDC Digital Temperature Controller fits Griffin and standard size beakers. The heating element is laminated between two layers of 15mil fiberglass reinforced silicone rubber.

Catalog Number	Mfr. No.	Type	Wattage
10-068-104	BriskHeat™ SDCJFAGBH02501	Beaker Heater: Temp. Control in °F	150w
10-068-105	BriskHeat™ SDCJFAGBH04001	Beaker Heater: Temp. Control in °F	200w
10-068-107	BriskHeat™ SDCJFAGBH10001	Beaker Heater: Temp. Control in °F	350w
10-068-100	BriskHeat™ SDCJCAGBH02501	Beaker Heater: Temp. Control in °C	150w
10-068-106	BriskHeat™ SDCJFAGBH06001	Beaker Heater: Temp. Control in °F	250w
10-068-101	BriskHeat™ SDCJCAGBH04001	Beaker Heater: Temp. Control in °C	200w
10-068-102	BriskHeat™ SDCJCAGBH06001	Beaker Heater: Temp. Control in °C	250w
10-068-103	BriskHeat™ SDCJCAGBH10001	Beaker Heater: Temp. Control in °C	350w

Description

Beaker Heater

• Easy-to-install and remove with Velcro™ like fastener
• Moisture and chemical resistant
• Uniform heat across surface of beaker
• Hook and loop closure allows for quick installation and removal
• Dielectric strength of over 2000V
• Power density: 5.0 watts/in.² (0.008 watts/mm²)
• Long power leads, 2 ft. (61cm) with 120VAC: Standard 2-prong plug (NEMA 1-15)
• Voltage: 120V

SDC Benchtop Digital Temperature Controller

• Digital on/off temperature controller
• Compatible with wide range of heaters and applications
• Self contained, plug and play design
• Easy programming (°C or °F)
• Temperature control range: 0° to 600°C or 32° to 999°F; Accuracy: ±0.6% of span, ±1 digit
• Exposure temperature: 0° to 50°C (32° to 122°F); Humidity: 80%, non-condensing
• 10A fused output
• Built-in J type thermocouple; 5 ft. (1.5m) long
• Upper and lower limits of setpoint can be adjusted
• Set-point value can be adjusted by using single key
• Hysteresis adjustable between 1 and 20 degrees
• Input power cord, 5 ft. (1.5m) for 120VAC unit: NEMA 5-15 plug
• Output power cord, 5 ft. (1.5m) for 120VAC unit: NEMA 5-15R receptacle

Certifications

Heater and controller are CE approved.

Specifications

• Accuracy: ±0.6%
• Temperature (English) Maximum: 450°F
• Includes: Type J Thermocouple
• Material: Fiberglass Reinforced Silicone Rubber
• Temperature Range (English) Outside: 32°F to 122°F
• Power Density: 5 w/sq. in.
• For Use With (Application): For oil bath and laboratory applications

• Certifications/Compliance: CE 73/23/EC
• Humidity: 80%
• Temperature (Metric) Maximum: 232°C
• Plug Type: NEMA 5-15 plug, NEMA 5-15R receptacle
• Temperature Range (Metric) Outside: 0°C to 50°C
• Amperage: 10 A
• Voltage: 120 V