Thermo Scientific™ Barnstead™ LabTower™ RO Water Purification System

Convert tap water into reverse osmosis water with integrated 100L storage using the Thermo Scientific™ Barnstead™ LabTower™ RO Water Purification System.

Supplier:  Thermo Scientific™ 50132391

Catalog No. 10-451-106

Description

Convert tap water into reverse osmosis (RO) water with integrated 100L storage using the Thermo Scientific™ Barnstead™ LabTower™ RO Water Purification System, which allows the user to easily read parameters with an ultra-modern controller. Mounted on casters, this compact system is an ideal pure water supply for any laboratory. The system is well-suited as a feed water source for dishwashers, autoclaves and general laboratory use. Choose from two system options with permeate flows of 20, 49 or 60L/hr. Resistivity/conductivity is clearly displayed on a large back-lit control panel that tilts for optimum viewing.

Advanced technology in a mobile design:

• An ultra-modern microprocessor control provides easy-to-read system parameters.
• Completely drainable integrated 100L high-purity water reservoir has a low-noise pressure booster as a standard component.
• Mounted on casters, the compact LabTower RO system is an ideal pure water supply for any laboratory.
• System is ideally suited as a feed water source for dishwashers, autoclaves and general laboratory use.
• A built-in pretreatment unit — consisting of a hardness stabilizer for protection of the reverse osmosis module from hardness formers and an activated carbon/5μm combi-cartridge — protects the system against free chlorine and particles, ensuring the long service life of downstream purification stages.

Compact and mobile design:

• System includes three system options with permeate flows of 20, 40 or 60L/hr.
• Stand-alone design with integrated 100L tank takes up ZERO bench space—casters allow for easy relocation.
• Systems can be upgraded later to accommodate growing water capacity demands.

Integrated 100L reservoirL

• System stores 100L of  RO water in a high-purity polyethylene PE opaque reservoir.
• Adjustable reservoir volume can be programmed for times of low demand—dispense from the reservoir to supply autoclaves, dishwashers, ultrapure water systems, etc.

Easy-to-operate clear display:

• Resistivity/conductivity clearly displayed on large back-lit control panel that tilts for optimum viewing.
• Status of current operating mode clearly indicating “production”, “stand-by”, “cleaning” or “disinfection” modes.
• Reservoir fill-level is shown as a percent.
• System parameters are code-protected to prevent accidental changes to set points.

GLP-compliant documentation:

• LabTower RO has been developed to fulfill GLP requirements.
• Recorded and traceable data can be obtained by printout via the RS-232 interface and accessory printer.
• Highly qualified and precise measurement of the conductivity is ensured by the cell constant of 0.16 cm^-1.

Specifications

• Bacterial Content: 99%
• Feed Water Monitoring: Yes
• Flow Rate: 40 L/hr. at 10°C
• Type: Reverse Osmosis Water Purification System
• Feedwater Pressure: 1 to 6 Bar
• Particles >0.2µM/mL: <1 μM/mL
• Power Consumption: 0.25 kW
• Temperature Range (Metric): 2°C to 35°C
• Height (Metric): 1500 mm
• Net Weight (Metric): 50 kg
• Voltage: 100/240 V

• Description: LabTower RO 40L/hr.
• Feedwater Source: Tap
• TOC Monitor with UV Intensity Monitoring: No
• Feedwater Connector: 3/4 in. NPT
• Operating Pressure: 2 to 6 bar
• Permeate performance: 40 L/hr. at 10°C
• Silica Removal: 98%
• Width (Metric): 450 mm
• Depth (Metric): 580 mm
• Electrical Requirements: 100/240 V 50/60 Hz
• Frequency: 50/60 Hz